Pablo circa Assembly And Installation Instructions Manual page 20

CIRCA PENDANT
ASSEMBLY INSTRUCTIONS
CIRCA PENDANT
4
CONNECT BUILDING WIRING INTO 2 POLE CONNECTOR
AS SHOWN. REFER TO SPECIFICATION LABEL ON
TRANSFORMER
6
TUCK WIRES AND POLE CONNECTIONS INTO CANOPY COVER, THEN SLIDE COVER PLATE UP TO CEILING AND SECURE
WITH SUPPLIED SCREWS
pg. 20
PUSH DOWN TAB AND INSERT
WIRES INTO HOLES AS SHOWN
THEN RELEASE TAB TO LOCK
WIRES INTO POSITION
5
CONNECT FIXTURE WIRING INTO OTHER 2 POLE
CONNECTOR AS SHOWN. REFER TO SPECIFICATION
LABEL ON TRANSFORMER
PUSH DOWN TAB AND INSERT
WIRES INTO HOLES AS SHOWN
THEN RELEASE TAB TO LOCK
WIRES INTO POSITION