Philips QT4045 Manual page 8

English
8
charging
Charge the appliance for at least 10 hours before you use it for the first
time and after a long period of disuse.
Do not charge the appliance for more than  hours.
The appliance cannot be run directly from the mains.
1 Switch off the appliance.
 Insert the appliance plug into the appliance and put the adapter in
the wall socket.
The charging light goes on to indicate that the appliance is
,
charging (Fig. ).
Note: The charging light does not change colour and does not go out when
the appliance is fully charged.
Charge the appliance at least 90 minutes for a single trimming session.
It takes approximately 10 hours to fully charge the battery.
 Remove the adapter from the wall socket and pull the appliance
plug out of the appliance.
preparing for use
Always comb your beard or moustache with a fine comb before you
start trimming.
using the appliance
absorbing cut hairs
The suction system is activated automatically as soon as you switch
on the appliance. It absorbs cut hairs during every kind of use, i.e.
trimming with and without comb attachment and contouring. The flexible
hair guide follows the contours of the face and directs cut hairs towards
the nozzle of the vacuum mechanism.
We advise you to empty the hair-collection chamber after each trimming
session. When trimming long, dense beards, it may also be necessary to
empty the hair-collection chamber during the trimming session in order