Advertisement
Trimmer Guard Attachment (continued)
motions trim area directly
ent trimming positions (i.e.
under the beard line.
upwards, downwards or
across). Practice is best for
To Thin and Taper Beard
optimum results.
1. Use a small comb to hold
To Trim Moustache without
hairs in place while trim-
Trimmer Guard Attachment
ming.
1. Remove Trimmer Guard
2. Hold Trimmer with front of
Attachment.
Trimmer facing away from
you.
2. Place a finger on upper lip
to lift hair up, away from
3. Trim hair ends using an
skin.
upward motion.
3. Trim hairs using an upward
4. Turn Trimmer OFF.
motion.
To Trim Moustache with
4. After achieving desired
Trimmer Guard Attachment
length, use a downward
• Be certain Trimmer Guard
motion to blend moustache
Attachment is on to prevent
hairs (Fig. 8).
trimming off too many
To Trim Moustache with Pop-
hairs.
Up Trimmer: Model
1. Comb hairs outward so
T-7000 only
they are at their maximum
1. Slide Pop-Up Trimmer
height and in the same
switch up (Fig. 9).
direction.
2. Hold Trimmer perpendicu-
2. Set Zoom Ring to desired
lar as shown and move cut-
setting.
ters sideways to achieve
• Hold Trimmer vertically
desired line above lip (Fig.
with front of Trimmer fac-
10).
ing you.
3. Trim any stray hairs.
• Trim hairs using a down-
4. Slide Pop-Up Trimmer
ward motion following the
down when finished.
direction of your hair growth
or you may trim against
ATTENTION: Main cutter is
your hair growth—
still operating while Pop-Up
whichever is preferred.
Trimmer is in use.
NOTE: Since all hairs do not
NOTE: Use a slow and gen-
grow in the same direction,
tle pressure. Too much
you may want to try differ-
pressure may trim more
hair than desired.
Attachment is ON and
Zoom Ring is on the lowest
5. Turn Trimmer OFF.
setting (#1).
To Trim Sideburns
2. Hold Trimmer horizontally
1. Comb sideburns following
with front of Trimmer facing
the direction of your hair
downwards or upwards.
growth.
3. Trim hairs using a down-
2. Be certain Trimmer Guard
ward or upward motion,
Attachment is ON.
whichever is more comfort-
3. Hold Trimmer vertically
able, following the direction
with front of Trimmer fac-
of your hair growth.
ing you.
4. Turn Trimmer OFF.
4. Trim sideburns using a
downward motion.
5. Turn Trimmer OFF.
To Achieve The
"Stubble" Look
• The Trimmer Guard
Attachment is unique
because it has a small slot
between the two rows of
teeth enabling you to trim
hairs to only .06 in./1.5mm
in length.
1. Be certain Trimmer Guard
8
10
9
Maintenance
IMPORTANT
pull Trimmer Guard
Attachment off Trimmer
• Always switch Trimmer
(Fig. 11) and remove hairs
OFF before cleaning.
by shaking and/or blowing
• Never clean, remove or
(Fig. 12).
replace Trimmer Guard
Once A Week
Attachment with motor on.
1. Be certain Trimmer is in
• Do NOT apply pressure to
OFF position.
cutters.
2. Remove Trimmer Guard
• Do NOT touch cutters
Attachment (Fig. 11).
with hard objects as this
may damage them.
3. Hold Trimmer as shown
and gently pull cutter
• DO NOT use while
backwards (Fig. 13).
bathing, showering or
immerse the unit in water
4. Lightly brush out cutters,
or other liquids as damage
hair chamber and
to Trimmer may occur.
Trimmer Guard Attach-
ment (Fig. 14 &15) with
• NEVER use harsh or cor-
cleaning brush provided.
rosive cleaners such as
benzene or bleach.
To Replace Cutters
During Use
If your cutters become dam-
aged or worn, do not contin-
• If cut hairs have accumu-
ue using the Trimmer.
lated in the comb area,
12
11
Replace cutters immediately.
1. Remove the old cutters by
pulling cutting unit back-
wards (Fig. 13) and then
15
pull it upwards off
Trimmer.
2. Install new Trimmer by
placing the two notches of
the new cutting unit into
the guide slots (Fig. 16).
3. Push the cutting unit
backuntil it "clicks" into
place (Fig. 17).
16
13
14
17
1
2
1
2
CLICK
1
Advertisement
