3-7 Chords
Any steps of Tracks 1 to 4 can become chords.
To turn a step into a chord hold any key and turn the encoder to select a chord
from the 15 available indicated as 2-16 the top row of LEDs.
To remove the chord turn the encoder back to position 1 (no chord)
3-8 Chord Editor
To enter the chord editor press oct up and oct down at the same time.
Now both oct LEDs are lit.
Roll the encoder to select a chord to edit (indicated as 2-16 on the top row of
LEDs )
Each chord can hold up to 5 notes. Simply press any keys to enable/disable notes,
C is the root note and is always lit.
The changes are automatically saved to memory.
When you are done press either oct buttons to exit chord editor