Table of Contents
Advertisement
5 Changing the MIDI channels
You can configure the MIDI channel of each track at any time.
Press and hold the encoder for 4 seconds to enter MIDI channel selection mode.
Now press a white key to select a track and roll the encoder to change the MIDI
channel displayed on the rows of LEDS
6 Memory SYSEX dumping/uploading
You can transfer all patterns and chords to and from a computer via MIDI
System Exclusive (SYSEX) transfers. This is handy to back up or share your
presets with fellow Crazy8 owners.
To transmit (dump) SYSEX:
Hold Oct Down during startup. The SYSEX is automatically sent out of the MIDI
port. The Oct Down LED flashes during the process.
To receive SYSEX:
Hold Oct Up during startup. The Oct Up LED flashes indicating that Crazy8 is
ready to receive the SYSEX
At the end of the transfer, the Eeprom will be updated. This takes around 13
seconds. The progress is indicated on the top LED row
Advertisement
Table of Contents
