Quick Start - twisted electrons Crazy8 User Manual

Quick Start

Let's create some MIDI chords on track 1 and a melody on track 5 (MIDI port2 &
CV/Gate)
Enter Pattern Mode
If you're not already in pattern mode, click the encoder, now pattern led is lit
Enable track 1
Make sure track 1 is enabled, simply press the first white key so the LED above it is
lit. You can disable the other tracks for now.
Select track 1
Let's make sure track 1 is selected. Hold shift and press the first white key.
Now track 1 LED is flashing indicating that we have selected the track.
Edit the pattern
Press the encoder to go into step mode. Now we can edit the pattern. Tap some
notes to create the pattern of your choice.
Add some chords
To turn any step into a chord, hold a key and roll the encoder while keeping the key
held.
You have a choice of 15 chords to choose from indicated on the top row of LEDS.
Try changing a few steps to chords. Use the encoder to change selected step and
repeat the above.
Go back to Pattern Mode
Click the encoder, now pattern led is lit
Enable track 5 and select it
Press the 5th white key to enable track 5, now hold shift and press the 5th white
key again to select it
Edit the pattern
Finally press the encoder to go back into step mode. Enter some notes to make a
melody over your chords!