Subscribe to Our Youtube Channel
Related Manuals for Usl CM SERIES
Summary of Contents for Usl CM SERIES
- Page 1 CM SERIES Ten Channel Monitor / Crossover 181 Bonetti Drive San Luis Obispo, CA 93401 ph: 805-549-0161 fax: 805-549-0163 e-mail:usl@uslinc.com...
- Page 2 One Year Limited Warranty USL, Inc. warrants that each product manufactured by it will be free from defects in material and workmanship under normal usage for a period of one (1) year after its purchase new from an authorized dealer. Our obligation under this warranty is limited to repairing...
- Page 3 Table of Contents Introduction ............4 Front Panel Description........5 Rear Panel Description.........7 Installation............9 Monitor and Bargraph Setup.......13 Monitor and bargraph Levels......14 Specifications.............15 Pinouts...............17 Please record the following information for your records: Model: ___________________ Serial Number: ___________ Date of Purchase: ________________ Purchased from: ____________________________________ - 3 -...
- Page 4 All controls necessary for daily operation of the processor are easily accessible on the front panel. The components that make up the CM Series monitors are of computer grade for reliability. All front panel controls are individually sealed for long life. All Ultra Stereo equipment has been “burned-in”...
- Page 5 You will need to supply the following materials: • Shielded audio cable for connecting the CM Series to the cinema processor and power amplifier outputs. • Four 10-32 x 1/2" screws to mount the CM Series in the audio equipment rack. FEATURES The CM Series monitor has the following standard features: •...
- Page 6 - 6 -...
- Page 7 - 7 -...
- Page 8 - 8 -...
- Page 9 3. Unshielded wire can be used to connect the output of the amplifiers to the appropriate monitor speaker. Inputs on the rear panel of the CM Series: All of these inputs are unbalanced except for the subwoofer. - 9 -...
- Page 10 Typical CM Series Triamp Terminal Wiring Left High/Mid Amplifier Input Left Low/Spare Amplifier Input Typical CM Series Triamp Amplifier Input Connection 115V Left High/Mid Amplifier Output Left Low/Spare Amplifier Output - 10 -...
- Page 11 Typical CM Series Processor Input Connection Cinema Processor OPTION CARD I/O MAIN AUDIO OUTPUTS DB-25 Cables Typical CM Series Triamp HD-15 Connection Left High/Mid Amplifier Input VGA Cables Left Low/Spare Amplifier Input - 11 -...
- Page 12 115V Typical CM Series Biamp Amplifier Input Connection Left High/Low Amplifier Output Typical CM Series Biamp Terminal Wiring LeftHigh/Low Amplifier Input Typical CM Series Biamp HD-15 Connection Left High/Low NOTE: When used in Biamp Amplifier mode, Mid band becomes Input...
- Page 13 Bsr + Rh - Rm/Re- LS + Ls + RS + Rs + SW + Lh + CM Series HD 15 pin outs Typical per connector Pin # Name Pin # Name Pin # Name Band A (1), - Signal...
- Page 14 The XTD-680D and the XTA-680B are discussed in detail in their own instruction manuals. 1. Bypass Card XTB-680B: When using external crossovers, the CM Series must be equipped with a bypass card in the crossover slot. For external crossovers or crossovers built into amplifiers: Turn biamp switch “ON”, triamp “OFF”.
-
Page 15: Specifications
Setting DIP Switches Processor Channel Configuration JSD-80/XD-10P CP-650 L, C, R, SW plus Ls/Rs channels 1-4 ON 1-4 ON L, C, R, SW plus Ls/Rs, Bsl/Bsr “EX” channels 1-4 ON, A-D ON 5-8 ON L, Lc, C, Rc, R, SW plus Ls/Rs channels 1-4 ON L, Le, C, Re, R, SW plus Ls/Rs... - Page 16 The CM Series Monitor is constructed of steel to minimize hum pickup and noise radiation. The overall size of the unit is 3.5" x 19" x 10.475". The CM Series is designed to mount in a standard rack frame or cabinet.
- Page 17 12 PIN PHOENIX 10 PIN PHOENIX CROSSOVER OUTPUTS MONITOR INPUTS TO POWER AMPLIFIER INPUTS FROM AMPLIFIER OUTPUTS 1. Left High + 1. Left High 2. Left High - 2. Left Mid 3. Left Mid + 3. Left Low 4. Left Mid - 4.
Need help?
Do you have a question about the CM SERIES and is the answer not in the manual?
Questions and answers