LG 55UB8500-UA Service Manual page 25

7. AUDIO output check
No Item Min
1 Audio practical
max Output, L/R
(Distortion=10%
max Output)
2 Speaker
(8Ω Impedance)
*Measurement condition:
(1) RF input: Mono, 1KHz sine wave signal, 100% Modulation
(2) CVBS, Component: 1KHz sine wave signal (0.4Vrms)
(3) RGB PC: 1KHz sine wave signal (0.7Vrms)
8. USB S/W Download
(optional, Service only)
(1) Put the USB Stick to the USB socket
(2) Automatically detecting update file in USB Stick
- If your downloaded program version in USB Stick is lower
than that of TV set, it didn't work. Otherwise USB data is
automatically detected.
(3) Show the message "Copying files from memory"
(4) Updating is staring
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
Typ Max Unit Remark
10.0 12.0 W EQ Off
8.10 10.8 Vrms AVL Off
Clear Voice Off
10 12 W EQ On
AVL On
Clear Voice On
(5) Updating Completed, The TV will restart automatically
(6) If your TV is turned on, check your updated version and
Tool option.
* If downloading version is more high than your TV have, TV
can lost all channel data. In this case, you have to channel
recover. If all channel data is cleared, you didn't have a DTV/
ATV test on production line.
* After downloading, TOOL OPTION setting is needed again.
(1) Push "IN-START" key in service remote controller.
(2) Select "Tool Option 1" and Push "OK" button.
(3) Punch in the number. (Each model has their number.)
- 25 -
LGE Internal Use Only