Activate/Deactivate Blis - Volvo XC 60 TWIN ENGINE Owner's Manual

Activate/deactivate BLIS*

58
The BLIS function can be activated/deacti-
vated.
59
Location of BLIS lamp .
Indicator lamp
The function is activated/deactivated using
the BLIS button in the centre display's func-
tion view.
Tap on the BLIS button in function view.
–
> BLIS is activated/deactivated - a green/
grey indicator is shown in the button.
If BLIS is activated when starting the engine, the
function is confirmed by the door mirror indicator
lamps blinking once.
58 Blind Spot Information
59 NOTE: The illustration is schematic - details may vary depending on car model.
Blind Spot Information
60
If BLIS was deactivated when the engine was
switched off, it will continue to be deactivated
when the engine is next started and no indicator
lights will then be illuminated.
Related information
•
BLIS* (p. 349)
•
Limitations of BLIS* (p. 351)
•
Messages for BLIS* and Cross Traffic Alert*
(p. 356)
DRIVER SUPPORT
Limitations of BLIS*
60
The BLIS function may have limitations in cer-
tain situations.
Examples of limitations:
•
Dirt, ice and snow covering the sensors may
reduce the functions and deactivate alerts.
•
The BLIS function is automatically deacti-
vated if a trailer, bicycle rack or similar is con-
nected to the car's electrical system.
•
For optimal performance of BLIS, no bicycle
rack, luggage carrier or similar should be
mounted on the car's towbar.
WARNING
•
BLIS does not work on sharp bends.
•
BLIS does not work when the car is
reversing.
Sensors
The sensors for BLIS are located inside each
corner of the rear wing/bumper. The sensors are
also used by the Cross Traffic Alert (CTA) func-
tion.
}}
351
* Option/accessory.