9. Unplug this product from the wall outlet to radio communications. However, there is no and refer servicing to quali ed service guarantee that interference will not occur in a personnel under the following conditions: particular installation. www.teledexeurope.com I SERIES V oIP USER GUIDE...
Page 3
Part 15 of the FCC Rules. These limits are company. The equipment must also be installed designed to provide reasonable protection against using an acceptable method of connection. The harmful interference in a residential installation. I SERIES V oIP USER GUIDE www.teledexeurope.com...
Page 4
Rules and the requirements adopted by ACTA. repair or warranty information, please contact On the bottom of this telephone is a label that Teledex at (800) 462-9446. If the equipment is contains, among other information, a product causing harm to the telephone network, the identi er in the format US:AAAEQ##TXXXX.
Page 5
PSTN line (public switched telephone Mount network). There are no user-serviceable parts inside the equipment. The I Series phone can be converted for wall mounting applications. The conversion is easiest Technical Speci cations when the handset and line cords are not connected.
(Do Not Disturb), Black List, Limit List • Auto-answer • Program settings through a standard web browser • Remote management functionality via Telnet • Classi cation management for common user’s password and superuser’s password I SERIES V oIP USER GUIDE www.teledexeurope.com...
Voice Quality • VAD: Voice Activity Detection • CNG: Comfortable Noise Generator This is the User Guide for the I Series VoIP phone. • LEC: Line Echo Canceller This phone is a standard SIP (Session Initiation • Packet Loss Compensation Protocol) phone, and some con guration is •...
Redial the last number dialed. M1–M10 On-Hook 10 speed dial 2.1.5 SPEED DIAL KEYS numbers The I Series phone has 10 speed dial keys Dialing “1” programmable through the Web UI under Dialing “2” Advanced -> Memory Key. Dialing “3”...
– Enable Static The Current Status page shows the working state – Set I Series’ IP address in the IP Address eld of the VoIP phone. The network part shows the – Set the Subnet mask in the Netmask eld connection state of the WAN interface and the –...
The DHCP server If there is a DHCP server in your local network, con guration won’t take e ect until you reboot the I Series phone will automatically obtain the the device. WAN port network information from your DHCP NAT: Enable Network Address Translation (NAT) server.
Page 14
Domain Realm: SIP domain—enter the SIP address information in IP packet headers while domain if any. Otherwise, the I Series phone will in transit across a tra c routing device. Keep use the proxy server address as the SIP domain.
Page 15
Auto TCP: Applicable Hospitality unchecked. environments. The default is unchecked/disabled. Auto TCP refers to TCP Auto-tuning. TCP tuning Signal Encode: Not applicable in Hospitality techniques adjust the network congestion environments. The default is unchecked. I SERIES V oIP USER GUIDE www.teledexeurope.com...
DNS: Default DNS (Domain Name Server) of the lease table. DNS Relay: Enables the Domain Name Server The purpose of a DMZ is to add an additional relay function. layer of security to an organization’s Local Area www.teledexeurope.com I SERIES V oIP USER GUIDE...
Local SIP Port: The SIP port of this phone. Access List Supports Two Type Limits: input_access limit or output_access limit. Each Load: Load the choices of the SIP line. type supports 10 items maximum. I SERIES V oIP USER GUIDE www.teledexeurope.com...
3.5.6 VLAN CONFIGURATION/QOS I Series rewall lter is the base WAN port. So CONFIGURATION the source address or input destination address should be the WAN port IP address. The I Series phones implement Virtual LANs and Quality of Service (QoS) within this section FIREWALL CONFIGURATION of the menu.
A digital map is based on rules judging when the ALWAYS SET TO “Undi erentiated” in the drop down user stops dialing and when to send the string of menu. numbers to the server. I Series phones support the following digital map: Di Serv Value: The value range: 0x28,0x30, 0x38,0x48,0x50,0x58,0x68,0x70,0x78,0x88,0x90,0x –...
Default is enabled, allowing for conference calling. Accept Any Call: Default is enabled. If this option is disabled, the I Series phone refuses the incoming call when the called number is di erent from I Series phone number. Black List: Any incoming call from these phone numbers will be refused.
Retrieve numbers (70 and 71) are a 3-second pause, then the digits 12345 are sent. arbitrary, and subject to the programmer of the PBX. They are used here as an example only. I SERIES V oIP USER GUIDE www.teledexeurope.com...
3.5.10 MMI FILTER Ring Volume: The volume of the alerting ring as heard by the called party. The MMI lter is used limit access to the I Series G729 Payload Length: G729 payload length. phone. When an MMI lter is enabled, only the G.729 is an audio data compression algorithm for...
(.z) le or the con guration le xxx.3300IP.txt), then click on the “Update” Con g Encrypt Key: The encryption key of the button. After the upgrade, the I Series phone will con rmation le. automatically restart. Protocol Type:...
MGR Log Level: Sets the MGR log level. SIP Log Level: Sets the SIP log level. IAX2 Log Level: Sets the IAX2 log level. Enable Syslog: Turns the system log information capture on. This information is highly technical www.teledexeurope.com I SERIES V oIP USER GUIDE...
3.8.5 MMI CONFIGURATION * * 4(I) 7(P) #. Set the greeting information on the LCD display Input the IP address of the I Series phone in the through the Man-Machine-Interface (MMI). browser, press the Enter key, and then you can visit the settings layout of the I Series phone.
CONFIGURE STATIC IP – Choose Static – Fill in the IP address of the I Series phone in Server Address: This is the IP address or FQDN the Static IP Address eld – Fill in the subnet mask in Netmask (Fully Quali ed Domain Name) of the IP/PBX SIP –...
It might come from the con guration le, option 66, option 125, or option 43. Re-Program New Con gID— The Teledex family of SIP phones has implemented **77*password*Con gID# (**RP*xxx*yyyy#) an innovative way to determine various states of Description: After entering **77*, the user must...
Lastly, cycle power (remove rmware version of the phone is circled in red. and replace WAN power cable) to restart the phone with factory default settings. Program Your Connection Under the VoIP -> Con guration Screen www.teledexeurope.com I SERIES V oIP USER GUIDE...
AutoSync Handset Registration Handsets can be registered most simply by performing AutoSync, which is to place the handset into the cradle and the pairing will happen automatically. I SERIES V oIP USER GUIDE www.teledexeurope.com...
Need help?
Do you have a question about the I SERIES and is the answer not in the manual?
Questions and answers