Introduction - Jeep KJ 2005 Service Manual

4

INTRODUCTION

FASTENER USAGE
DESCRIPTION
DESCRIPTION
WARNING: Use of an incorrect fastener may result
in component damage or personal injury.
Fasteners and torque specifications references in
this Service Manual are identified in metric and SAE
format.
During any maintenance or repair procedures, it is
important to salvage all fasteners (nuts, bolts, etc.)
for reassembly. If the fastener is not salvageable, a
fastener of equivalent specification must be used.
DESCRIPTION
Most stripped threaded holes can be repaired using
a Helicoil . Follow the vehicle or Helicoil recommen-
dations for application and repair procedures.
1 High Beam
2 Fog Lamps
3 Headlamp, Parking Lamps, Panel Lamps
4 Turn Warning
5 Hazard Warning
6 Windshield Washer
7 Windshield Wiper
8 Windshield Wiper and Washer
9 Windscreen Demisting and Defrosting
10 Ventilating Fan
11 Rear Window Defogger
12 Rear Window Wiper
Fig. 2 INTERNATIONAL CONTROL AND DISPLAY SYMBOLS
INTERNATIONAL SYMBOLS
DESCRIPTION
The graphic symbols illustrated in (Fig. 2) and the
following International Control and Display Symbols
Chart are used to identify various instrument con-
trols. The symbols correspond to the controls and dis-
plays that are located on the instrument panel.
METRIC SYSTEM
DESCRIPTION
The metric system is based on quantities of one,
ten, one hundred, one thousand and one million.
The following chart (Fig. 3) will assist in convert-
ing metric units to equivalent English and SAE
units, or vise versa.
13 Rear Window Washer
14 Fuel
15 Engine Coolant Temperature
16 Battery Charging Condition
17 Engine Oil
18 Seat Belt
19 Brake Failure
20 Parking Brake
21 Front Hood
22 Rear hood (Decklid)
23 Horn
24 Lighter
KJ