1. Manuals
  2. Brands
  3. Amperes Manuals
  4. Receiver
  5. iPX5151
  6. Instruction manual

Amperes iPX5151 Instruction Manual

Ethernet paging client
Hide thumbs Also See for iPX5151:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
iPX5151
Ethernet Paging Client
Thank you
for choosing another quality product from Amperes Electronics.
iPX5151 is the Ethernet Paging Client which receives and transmits paging audio and RS485 data from digital paging
microphone, which is then fed to PA mixer for amplification.
iPX5151 replaces iPX5150 with a totally improvised architectures, notably on the operational protocol and size reduc-
tion. Multicast transmission is now employed, enabling it to send audio or data at faster rate and the quantity of clients
in a network can be up to 255 units.
Parameter settings is done using http, connected directly to the unit for channel setup, bass and treble controls,
volume, etc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iPX5151 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Amperes iPX5151

Summary of Contents for Amperes iPX5151

  • Page 1 Thank you for choosing another quality product from Amperes Electronics. iPX5151 is the Ethernet Paging Client which receives and transmits paging audio and RS485 data from digital paging microphone, which is then fed to PA mixer for amplification. iPX5151 replaces iPX5150 with a totally improvised architectures, notably on the operational protocol and size reduc- tion.

  • Page 2: Parts Identification

    LED to indicate audio signal’s presence. 9. MIC AUDIO INPUT Audio input signal from paging mic with balanced line level. 10. AUDIO OUTPUT PORT Audio output from client for connection to mixer, etc with balanced line level. PAGE 2 iPX5151 | ETHERNET PAGING CLIENT...
  • Page 3 & data SUB RACK Note: In a system, only one iPX5101 is required, no matter what the size of the system or the number of clients ( iPX5151 ) are installed. iPX5151 | ETHERNET PAGING CLIENT PAGE 3...

  • Page 4: Network Configuration

    Device Setup Via Browser iPX5151 shall require some simple setups, kindly follow the step by step instructions as listed below. The unit shall be connected to LAN network together with iPX5101 IP Server / PMX II to form a complete system. The default IP address is 192.168.0.151.

  • Page 5: System Configuration

    Ensure Paging Server IP is correctly set. If the paging source is iPX5101, the default IP address shall be 192.168.0.151. If PMX II LAN is used as the source, the Paging Server IP shall correspond to the PC’s IP address. IPX5151 | ETHERNET PAGING CLIENT PAGE 5...
  • Page 6 ( new file downloaded from website or source directly from us ) and click update. Update Web Page No the chosen 2. To update the browser, choose binary file with “webbin” extension and click update. Update Firmware No the chosen PAGE 6 iPX5151 | ETHERNET PAGING CLIENT...

  • Page 7: Technical Specification

    Case : Dimension (WxHxD) 100 x 147 x 40 mm Weight 300 g Note: The above specifications are correct at time of printing but subjected to changes without prior notice due to product improvements. iPX5151 | ETHERNET PAGING CLIENT PAGE 7...

  • Page 8: Warranty Conditions

    Information contained in this manual is subject to change without prior notice and does not represent a commitment on the part of the vendor. AMPERES ELECTRONICS SDN BHD shall not be liable for any loss or damages whatsoever arising from the use of information or any error contained in this manual.

Table of Contents