AEG SCT81900S0 User Manual page 6

6 www.aeg.com
Fridge temperature indicator
4
Fridge temperature regulator / -
5
button
DYNAMICAIR indicator
6
DYNAMICAIR button
7
Appliance Pilot light
8
Appliance ON/OFF switch
9
Freezer temperature regulator / +
10
button
3.2 Switching on
1. Insert the plug into the wall socket.
2. Press the ON/OFF switch.
The Pilot light will light up.
The alarm indicator light flashes since the
temperature is reached. The acoustic
alarm sounds.
3. Press the alarm reset to reset the
alarm.
3.3 Switching off
To switch off fridge or appliance reaped
the procedure:
1. Press ON/OFF for 5 seconds.
2. Countdown from -3-2-1 will shown.
When -1- appears the fridge /
appliance is turned off. The
temperature indicators and Pilot light
switch off.
3.4 Temperature regulation
The temperature is adjusted using the
temperature setting buttons. These
buttons are connected to the
temperature indicator.
To operate the appliance, proceed as
follows:
• Set the temperature by pressing
temperature regulator.
The temperature indicators will shown
the changed setting and temperature
indicator flashes.
• Each time by pressing the
temperature regulator the
temperature rise by 1°C.
Freezer temperature indicator
11
Freezer temperature regulator / -
12
button
FROSTMATIC indicator
13
FROSTMATIC button
14
Alarm indicator
15
Alarm reset button
16
The set temperature will be
reached within 24 hours. The
temperature indicator will
illuminate.
For correct storage of the foodstuff
following temperatures should be set:
• fridge : +5°C
• freezer : -18 °C
When the setting is changed
the compressor does not
start immediately if
automatic defrosting is
currently taking place. As the
storage temperature in the
fridge is reached quickly
store food immediately after
switching on.
3.5 Temperature indicators
The temperature indicators show several
information:
• During normal operating the
temperature set for fridge and freezer
are displayed;
• During adjusting temperature flashing
display indicates the fridge or freezer
current set.
3.6 Temperature setting
buttons
The temperature is adjusted using the
temperature setting buttons. These
buttons are connected to the
temperature indicator.
Press on of the two temperature setting
buttons is to adjust the temperature 1°C
increments.