Related Manuals for GKB HZ2001
Summary of Contents for GKB HZ2001
- Page 1 Before operating this unit, please read this manual thoroughly and retain it for future reference. User’s Manual GKB HZ2001 HD-SDI PTZ Camera 3Megapixel Outdoor HD-SDI PTZ Camera with 20X Optical Zoom Lens...
-
Page 2: About This Manual
GKB HZ2001 is a surveillance device for use in security systems that assist in the management of security. GKB is not liable nor can be held responsible for any material loss and/or personal injuries cause by robbery, fire, natural disaster or problems of any kind resulting from the use of this device. -
Page 3: Table Of Contents
GKB HZ2001 HD-SDI PTZ Camera Table of Contents Warning and Precaution 1. About The Product ........................ 2 1.1. F eatures .......................... 2 1.2. Functions .......................... 2 ... -
Page 4: Warning And Precaution
Do not disassemble. Precaution 1. Do not drop the camera. GKB HZ2001 is not designed to resist heavy impact. Handle with care to avoid damage to sensitive internal components. 2. Do not expose the camera to radioactivity and mount facing strong light sources. Exposing the camera to radioactivity or strong light over long periods of time will damage the camera’s sensor. -
Page 5: About The Product
GKB HZ2001 HD-SDI PTZ Camera About The Product 1.1 Features Up to 1080p/30, 1080p/25 video formats; HD-SDI video output; HD-SDI and CVBS simultaneous output; 1/2.8" Exmor CMOS; 20X zoom module, D/N, WDR; Pan Speed: 0.05º-400º/S, Tilt Speed: 0.03º-240º/S (Preset status);... -
Page 6: Focus 2
GKB HZ2001 HD-SDI PTZ Camera Auto Flip When the camera tilts downward and goes just beyond the vertical angle, the camera rotates 180º. When the camera rotates (flips), the camera starts moving upward as you continue to hold joystick in the down position. - Page 7 GKB HZ2001 HD-SDI PTZ Camera Patterns A pattern is a saved, repeating, series of pan, tilt, zoom and preset functions that can be recalled with a command from a controller or automatically by a programmed function (alarm action or park action or power-up action).
-
Page 8: Technical Parameters
GKB HZ2001 HD-SDI PTZ Camera 1.3 Technical Parameters GKB HZ2001 High Speed Dome Camera Zoom module Sony FCB-EH6300 Image Sensor 1/2.8” Exmor CMOS Sensor Number of Effective Pixels 3270K pixels 20X Optical Zoom (F=1.6~3.5, Lens f=4.7~94.0mm) 12X Digital Zoom... -
Page 9: Installation
GKB HZ2001 HD-SDI PTZ Camera Installation This section contains detailed instructions for installing the camera. These instructions assume that the installer has a good knowledge of installation techniques and is capable of adopting safe installation methods. 2.1 DIP Switch Setting Before installing the camera drive, check the DIP switches;... -
Page 10: Installation
GKB HZ2001 HD-SDI PTZ Camera 2.2 Installation The camera has four types of mountings: wall mount, in-ceiling mount, surface mount, and pole mount. Please make sure which type you are installing. 2.2.1 Dimensions Ceiling Mount In-Ceiling Mount Wall and Pole Mounts ... -
Page 11: Brackets And Installation Holes
GKB HZ2001 HD-SDI PTZ Camera 2.2.2 Brackets and Installation Holes Base Installation Holes of Ceiling Mount Wall Bracket Installation Holes for Wall Bracket Pole Bracket and Installation Holes In-ceiling Mount and Installation Holes ... -
Page 12: Wall Mount Installation
GKB HZ2001 HD-SDI PTZ Camera 2.2.3 Wall Mount Installation Step 1. Install bracket on wall Pic. 3 Refer to the instructions supplied with the bracket. Take out cables for the dome through the bracket. And install the bracket to the wall. See Pic. 3 Pic. - Page 13 GKB HZ2001 HD-SDI PTZ Camera Connect cables to hole of pin. Insert the pin inside the back box. When finished, close the door to the back box and turn on the power. The LED will light up. See Pic. 5.
- Page 14 GKB HZ2001 HD-SDI PTZ Camera Step 3. Install lower dome. Pic. 8 Take out a screw from lower dome. Link cables, screw, and lower dome. See Pic. 8. Pic. 9 Line up the mounting screw holes, and install the two mounting screws. Push the lower dome inside the back box.
-
Page 15: In-Ceiling Mount Installation
GKB HZ2001 HD-SDI PTZ Camera 2.2.4 In-ceiling Mount Installation Step 1. Prepare In-ceiling Pic. 11 Locate the center point of the in-ceiling mounting location. Insert the compass tool into the hole. Draw a circle on the ceiling using the compass tool and a pencil. See Pic. 12 (Left). - Page 16 GKB HZ2001 HD-SDI PTZ Camera Step 2. Install back box Pic. 14 Take out bracket from back box. Insert the back box into ceiling. See Pic. 14. Install a safety chain/cable (not supplied) that can stand up to 32 pounds (14.6kg). Press the thumb fastener and open the hinged door to the back box.
- Page 17 GKB HZ2001 HD-SDI PTZ Camera Pic. 17 Shooting " If the LED does not light up, refer to Section : 4. Trouble Step 3. Install dome drive Set the DIP switches for SW1 and SW2 at the bottom of the camera drive for the appropriate receiver address, communication protocol, and baud rate.
- Page 18 GKB HZ2001 HD-SDI PTZ Camera Step 4. Install lower dome Pic. 20 Take out a screw from lower dome. Link cables, screw, and lower dome. See Pic. 20. Pic. 21 Line up the snaps on trim ring with the mounting screws on the back box. Snap the trim ring into the plastic snap washers on the mounting screws.
-
Page 19: Surface Mount Installation
GKB HZ2001 HD-SDI PTZ Camera 2.2.5 Surface Mount Installation Step 1. Install back board of surface mount Pic. 22 Locate the back board of the camera location. Drill a hole in the ceiling using a drill. Insert the screw and back board into the hole. - Page 20 GKB HZ2001 HD-SDI PTZ Camera Step 2. Install dome drive Set the DIP switches for SW1 and SW2 on the bottom of the dome drive for the appropriate receiver address, communication protocol, and baud rate. Refer to the labels on the dome drive or DIP SWITCH SET in this manual.
-
Page 21: Pole Mount Installation
GKB HZ2001 HD-SDI PTZ Camera 2.2.6 Pole Mount Installation Installation See Section 0 2.2.3 Wall Mount ... -
Page 22: Operation Guide
GKB HZ2001 HD-SDI PTZ Camera Operation Guide 3.1 Operation At Power Up The camera employs the default settings the first time it is switched on. Changes to the settings will be permanently stored and will be made available the next time the camera is switched on. You can return to the default settings by means of the appropriate menu option at any time. -
Page 23: How To Use Our Control Keyboard
GKB HZ2001 HD-SDI PTZ Camera 3.2 How To Use Our Control Keyboard The camera is ready to receive commands from our control keyboard (see figure below) after connecting. " Besides our control keyboard, the PTZ camera also accepts other standard control devices with Pelco D/P or other accepted protocols. -
Page 24: Control Keypad Command Types
GKB HZ2001 HD-SDI PTZ Camera Some application examples of controls are shown in detail below. Using the joystick A command can also be given simply by moving the joystick because this generates actions on the camera or OSD (On Screen Display) menu. -
Page 25: Camera Motions
GKB HZ2001 HD-SDI PTZ Camera 3.4 Camera Motions After selecting a camera, it can be moved either directly using the control panel as described below: Panning (horizontal) and tilting (vertical). Zooming, focusing and IRIS opening. Preset positions programming and recalling. -
Page 26: Zoom
GKB HZ2001 HD-SDI PTZ Camera With AUTO FLIP on, the camera will proceed over the vertical axis when the joystick is tipped downwards. This is because, when the vertical axis is reached, the camera flips automatically by 180 degrees and resumes the initial trajectory. -
Page 27: Iris Opening
GKB HZ2001 HD-SDI PTZ Camera 3.4.4 IRIS Opening The IRIS opening may be controlled manually using the OPEN and CLOSE commands. The manual setting made using OPEN and CLOSE will be kept only until a pan, tilt or zoom command is used if the automatic IRIS opening option is enabled (the default setting is on). -
Page 28: Function Program Menu
GKB HZ2001 HD-SDI PTZ Camera 3.5 Function Program Menu Use the following control panel command to access the function programming menu. PRESET + 95 + ENTER At this point, if no password is required for access, the following first level menu will appear on the screen: MAIN ... - Page 29 GKB HZ2001 HD-SDI PTZ Camera " Take note of the new password and keep it in a safe place. Simply move the joystick vertically to scroll the menu and point the cursor to the menu item to be selected: at this point, select OPEN to access the selected second level.
-
Page 30: System Information
GKB HZ2001 HD-SDI PTZ Camera 3.5.1 System Information In the first level menu, select SYSTEM INFORMATION to display information concerning the protocol, the camera address, the presetting number, the language of use and the measured temperature. SYSTEM I NFORMATION ... -
Page 31: Label Position
GKB HZ2001 HD-SDI PTZ Camera Option Value Explanation PRESET LABEL ON/OFF Show or hide presetting labels (max. 64). ZONE LABEL ON/OFF Show or hide zone labels. ZOOM ON/OFF Show or hide zoom labels. Show or hide camera pan/tilt degrees. The coordinates... -
Page 32: Main Programming Menu (Dome Settings 1)
GKB HZ2001 HD-SDI PTZ Camera 3.5.2.1 Label Position The labels may be positioned where required on the screen. ZONE DOME PRESET COMPASS EVENT ... -
Page 33: Camera
GKB HZ2001 HD-SDI PTZ Camera Option Value Explanation Camera parameter programming submenu (refer to Section CAMERA Camera motion parameter programming submenu (refer to MOTION Section 0). POWER Power up parameter submenu (refer to Section 0). PRESETS Preset parameter submenu (refer to Section 0). - Page 34 GKB HZ2001 HD-SDI PTZ Camera Option Value Explanation DIGITAL ZOOM ON/OFF Switch digital zoom ON or OFF. Switch back light compensation ON and OFF. The BACK BACK LIGHT ON/OFF LIGHT COMPENSATION function is useful for improving COMP visibility when the background light is very bright.
- Page 35 GKB HZ2001 HD-SDI PTZ Camera Option Value Explanation In this mode: The shutter opening time cannot be set and is automatically adjusted. AUTO Auto IRIS opening automatically adjusted. Gain control is automatic (AGC ON). In this mode: The shutter opening time may be varied as programmed in the “LOW LIGHT...
- Page 36 GKB HZ2001 HD-SDI PTZ Camera 1/1, 1/2, 1/3, 1/6, 1/12, 1/25, 1/50, 1/75, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425, 1/600, 1/1000, This selects the maximum opening of the IRIS. It 1/1250, 1/1750, is used to manually set the IRIS opening time.
- Page 37 GKB HZ2001 HD-SDI PTZ Camera " The following items cannot be accessed in if “ AE MODE ” is set to “ AUTO ”: LOW LIGHT LIMIT IRIS LEVEL AGC LEVEL BRIGHT LEVEL WHITE BALANCE sub-menu The WHITE BALANCE MENU is used to set the parameters of white balance.
- Page 38 GKB HZ2001 HD-SDI PTZ Camera ADDITIONAL SHARPNESS O N ...
-
Page 39: Motion
GKB HZ2001 HD-SDI PTZ Camera 3.5.3.2 Motion MOTION AUTO F LIP O N ... - Page 40 GKB HZ2001 HD-SDI PTZ Camera The camera performs a frame scan at the end of FRAME SCAN the park time: the horizontal scan is performed in the SET SCAN limits. PRESET 1/PRESET The camera goes to preset 1 or preset 8 at the end of the park time.
- Page 41 GKB HZ2001 HD-SDI PTZ Camera CLEAR AZIMUTH This is used to delete the zero position settings ZERO (see below). Table 8 SET SCAN submenu This includes a number of settings related to the programming of horizontal FRAME SCAN limits.
-
Page 42: Power Up
GKB HZ2001 HD-SDI PTZ Camera 3.5.3.3 Power Up POWER U P POWER U P A CTION NONE BACK EXIT Screen 12: Power Up Option Value Explanation NONE No action is performed at the end of power up. -
Page 43: Presets
GKB HZ2001 HD-SDI PTZ Camera 3.5.3.4 Presets PRESETS PRESET N UMBER 1 **PRESET N OT D EFINED** <EDIT P RESET L ABEL> ... - Page 44 GKB HZ2001 HD-SDI PTZ Camera PRESET N UMBER 1 PRESET L ABEL 1 -‐ -‐ -‐ -‐ -‐ ...
-
Page 45: Patterns
GKB HZ2001 HD-SDI PTZ Camera 3.5.3.5 Patterns PATTERNS PATTERN N UMBER 1 <PROGRAM P ATTERN> <CLEAR C URRENT P ATTERN> BACK EXIT ... -
Page 46: Zones
GKB HZ2001 HD-SDI PTZ Camera 3.5.3.6 Zones ZONES ZONE N UMBER 1 **ZONE N OT D EFINED** <EDIT Z ONE L ABEL> ... - Page 47 GKB HZ2001 HD-SDI PTZ Camera ZONE N UMBER 1 ZONE L ABEL 1 -‐ -‐ -‐ -‐ -‐ ...
-
Page 48: Clear Set
GKB HZ2001 HD-SDI PTZ Camera 3.5.3.7 Clear Set CLEAR S ET CLEAR Z ONES CLEAR P RESETS CLEAR P ATTERNS RESTORE F ACTORY D EFAULT ... -
Page 49: Secondary Programming Menu (Dome Settings 2)
GKB HZ2001 HD-SDI PTZ Camera 3.5.4 Secondary Programming Menu (Dome Settings 2) In the first level menu, select <DOME SETTINGS 2> and the corresponding submenus to access the other menus. DOME S ETTINGS 2 ... -
Page 50: Alarms
GKB HZ2001 HD-SDI PTZ Camera 3.5.4.1 Alarms ALARMS ALARM N UMBER 1 SEQUENCE ( SECS) 1 <ALARM S ETTINGS> <CLEAR S ET> ... - Page 51 GKB HZ2001 HD-SDI PTZ Camera ALARM N UMBER 1 ALARM A CT NONE ACTIVATE A UX OFF ...
- Page 52 GKB HZ2001 HD-SDI PTZ Camera Output 1 is on. Output 2 is on. This determines the current AUX gives output ALARM ON, OFF actions or not. It is related to the above setting CONTACT ACTIVATE AUX. Table 16 "...
-
Page 53: Addr Setting
GKB HZ2001 HD-SDI PTZ Camera 3.5.4.2 Addr setting ADDR S ETTING ADDR T YPE HARD ADDR H ARD 255 ADDR S OFT ... - Page 54 GKB HZ2001 HD-SDI PTZ Camera PLEASE I NPUT S OFT A DDR ADDR S OFT 1 2 3 4 5 6 7 8 9 0 ...
-
Page 55: Password
GKB HZ2001 HD-SDI PTZ Camera 3.5.4.3 Password PASSWORD ENABLE P ASSWORD OFF <EDIT P ASSWORD> BACK EXIT Screen 24: Password Option Value Explanation ENABLE PASSWOR ON/OFF This enables the password. -
Page 56: Windows Blanking
GKB HZ2001 HD-SDI PTZ Camera 3.5.4.4 Windows Blanking " Windows blanking is only available for Sony Modules at present. The camera can be used to define up to eight privacy zones which blank out certain areas of the screen concealing them from the operator’s sight. - Page 57 GKB HZ2001 HD-SDI PTZ Camera This is used to select the blanking window color: 0 → black 1 ~ 6 → grey (1 dark; 6 light) 7 → white 8 → red SET MASK 0 ~ 13 9 →...
- Page 58 GKB HZ2001 HD-SDI PTZ Camera -5º~85º 55º~92º -5º~95º 70º~92º Table 20 The coordinates shown on the monitor refer to the central point of the monitor (where the diagonals meet). SET WINDOWS submenu This includes the operations needed to position and configure the privacy zones.
- Page 59 GKB HZ2001 HD-SDI PTZ Camera EDIT W INDOW L OCATION IRIS O PEN T O C ONTINUE IRIS C LOSE T O C ANCEL Screen 28: Edit Window Location A cross-shaped pointer will appear on the monitor: this pointer will correspond to the middle of the privacy zones being created.
- Page 60 GKB HZ2001 HD-SDI PTZ Camera EDIT WINDOW ZOOM submenu This menu item is used to define the zoom level at which the privacy zone becomes visible after defining the color and the position of the privacy zone.
-
Page 61: Heater Setting
GKB HZ2001 HD-SDI PTZ Camera 3.5.4.5 Heater Setting HEATER S ETTING HEATER D ISPLAY ON HEATER M ODE AUTO TEMPERATURE S ET ... -
Page 62: Cruise Setting
GKB HZ2001 HD-SDI PTZ Camera 3.5.4.6 Cruise Setting CRUISE DWELL T IME<SECS> 7 CRUISE T RACKING ON PRESET L IST ... -
Page 63: Tracking Setting
GKB HZ2001 HD-SDI PTZ Camera 3.5.4.7 Tracking Setting The auto tracking function is used to automatically track moving objects by detecting grayscale variations in the frame. TRACKING S ETTING DEFAULT S ETTING ... -
Page 64: Time
GKB HZ2001 HD-SDI PTZ Camera The STOP TRACK option leaves the STOP TRACK camera in the position reached and deactivates the tracking function. This option determines the maximum zoom ZOOM SETTING OFF, 1 ~ 18 value that the camera may use for tracking the object. - Page 65 GKB HZ2001 HD-SDI PTZ Camera Option Value Explanation This switches tracking function intervention zone BOUNDARY LIMIT ON/OFF on and off. CLEAR This deletes the intervention area. BOUNDARY LEFT LIMIT ON/OFF Left limit of the intervention zone. RIGHT LIMIT ON/OFF Right limit of the intervention zone.
- Page 66 GKB HZ2001 HD-SDI PTZ Camera Recommended control parameters SIZE SENS: select SMALL particularly in poor lighting conditions to improve performance. GRAY SENS: most false alarms are caused by the tracking of unexpected objects. For this reason, it is preferable to select low sensitivity.
-
Page 67: Event
GKB HZ2001 HD-SDI PTZ Camera 3.5.4.8 Time TIME TIME F ORMAT ... - Page 68 GKB HZ2001 HD-SDI PTZ Camera Screen 35: Event Option Value Explanation EDIT EVENT This entry is to edit the event label. LABEL This entry is to edit event: action, start time and EDIT EVENT stop time etc.
- Page 69 GKB HZ2001 HD-SDI PTZ Camera EDIT E VENT EVENT L ABEL ...
- Page 70 GKB HZ2001 HD-SDI PTZ Camera pausing for approximately 2” every 142°. The camera performs a frame scan on alarm: FRAME SCAN the horizontal scan is performed in the SET SCAN limits. PRESET 1/PRESET The camera goes to preset 1 or preset 8 at the end of the park time.
-
Page 71: Dome Label
GKB HZ2001 HD-SDI PTZ Camera 3.5.5 Dome Label DOME L ABEL <EDIT D OME L ABEL> <CLEAR D OME L ABEL> BACK EXIT Screen 38: Dome Label Menu... -
Page 72: Special Control Panel Commands
GKB HZ2001 HD-SDI PTZ Camera 3.6 Special Control Panel Commands The camera can be programmed and operated using various quick control panel commands. " Below panel commands are based on using our keyboard controller. In case of other control device, please refer to the relative manual. -
Page 73: Trouble Shooting
GKB HZ2001 HD-SDI PTZ Camera Trouble Shooting Problem Possible Reason Solution Wrong wire Check and reconnect wires connections Wrong or bad power Change power source source Power on normally but no video signal Fuse broken. Change fuse... -
Page 74: Annex
GKB HZ2001 HD-SDI PTZ Camera Annex 5.1 DIP Switch Chart DESCRIPTION PELCO-P Protocol PELCO-D DESCRIPTION 2400 Protocol 4800 9600 DESCRIPTION 1080i60 1080i50 720P60 720P50 BAUD RATE (BPS) 1080P30 1080P25 720P30 720P25 Table 32: SWITCH1 SETTING ADDRESS ... - Page 75 GKB HZ2001 HD-SDI PTZ Camera ...
- Page 76 GKB HZ2001 HD-SDI PTZ Camera ...
- Page 77 GKB HZ2001 HD-SDI PTZ Camera ...
- Page 78 GKB HZ2001 HD-SDI PTZ Camera ...
- Page 79 GKB HZ2001 HD-SDI PTZ Camera ...
- Page 80 GKB HZ2001 HD-SDI PTZ Camera Table 33: SWITCH2 SETTING ...
- Page 81 GKB HZ2001 HD-SDI PTZ Camera Warranty Policy For detailed information on product warranties and warranty claim, please contact your local GKB distributor or agent. CR100000306 © 2013 GKB Security Corporation. Specifications are subject to change without prior notice. ...