Table of Contents
Advertisement
Technical Specifications
1.
Standard Test C o n d itio n s
All tests shall be performed under the following conditions, unless otherwise specified.
1.1
Ambient light
1.2
Viewing distance
1.3
Warm up time
1.4
PDP Panel facing
1.5
Measuring Equipment :
1.6
Magnetic field
1.7
Control settings
1.8
Power input
1.9
Ambient temperature :
1.10 Display mode
1.11 Other conditions
1.11.1
1.11.2
:
150ux (When measuring IB, the ambient luminance
^0 .1 C d /m 2)
:
50cm in front of PDP
:
30 minutes
:
no restricted
Minolta CA 100 photometer
:
no restricted
:
Brightness, Contrast, Tint, Color set at Center(50)
:
120Vac, 60Hz
20°C ± 5°C (68°F ± 9°F)
:
Resolution 1024 (H) x 1024 (V) Pixels
:
With image sticking protection of PDP module, the luminance will descend
by time on a same still screen and rapidly go down in 5 minutes. When
measuring the color tracking and luminance of a same still screen, be sure
to accomplish the measurement in one minute to ensure its accuracy.
Due to the structure of PDP, the extra-high-bright same screen should not
hold over 5 minutes for fear of branding on the panel.
3 / 6 0
PDP4273M
N
Advertisement
Table of Contents
