4.3.3 Running Environment
With the control software installed, you can use the software to send RS232 commands
to control TL-A70-40W.
4.3.4 Function Settings
With the control software, we can easily switch the input channel, mute the output,
check the status, and adjust the volume etc. Please refer the details in RS232
Communication Commands.
The interface of the control software is showed as below:
Parameter Configuration area
Monitoring area, indicates if the
command sent works.
Figure 12 Main Interface of Control Software
TL-A70-40W User Manual
Command Sending area
10
www.tlnetworx.com