Table of Contents
Advertisement
4.3 Operations of Control Software
4.3.1 Connection with Computer
When the amplifier connects to the COM port of a computer with control software,
users can control it by that computer.
To control the amplifier, users should use a 3-pole male captive screw to 9-pin HD
female connector and use the CommWatch software published on the
www.tlnetworx.com.
4.3.2 Installation/uninstallation of RS232 Control Software
l Installation
Ø Connect the input source devices and the output device according to the system
diagram.
Ø Copy the RS232 control software to the computer, and then connect the RS232 port
of the computer to the TL-A70-40W.
Ø Double-click the EXE program to execute the software.
Here we take the software CommWatch.exe as example. The icon is showed as below:
l Uninstallation Delete all the control software files in corresponding file path.
Figure 10 Connection of RS232 Port
Figure 11 Control Software
9
TL-A70-40W User Manual
PC
www.tlnetworx.com
Advertisement
Table of Contents
