Get Started; Install Batteries; Prepare The Remote Control; Connect Power - Philips AZ3831 User Manual

3 Get started

Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus. The
model number and serial number are on the
bottom of your apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________

Install batteries

Note
•
You can use both batteries and AC power as power
supply of this device.
1
Open the battery compartment.
2
Insert eight batteries (not supplied) (type:
R-20, UM-1 or D-cells) with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
b
a
8 EN

Prepare the remote control

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
For first-time use:
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
1 1
2 2

Connect power

Warning
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the apparatus.
•
Risk of electric shock! When you disconnect the AC
power, always pull the plug from the socket. Never pull
the cord.
1
Switch the voltage selector at the bottom
of the unit to the local power line voltage.
3 3