5 Listen to the
radio
Note
•
For optimal reception, fully extend and adjust the
position of the FM antenna.
•
Position the antenna as far away as possible from
your TV, VCR, or other radiation source to prevent
interference.
Tune to a radio station
1
Press SOURCE repeatedly (or rotate
SOURCE on the main unit) to select FM
or MW.
2
Press and hold
/
for more than
three seconds.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station:
Press
/
repeatedly until you find
optimal reception.
Program radio stations
automatically
Note
•
You can program a maximum of 20 FM radio stations
and 20 MW radio stations.
In tuner mode, press and hold PROG for
more than three seconds to activate automatic
program mode.
» [AUTO] (auto) is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
» The first programmed radio station is
broadcast automatically.
EN
Program radio stations
manually
Note
•
You can program a maximum of 20 FM radio stations
and 20 MW radio stations.
1
Tune to a radio station.
2
Press PROG to activate program mode.
» [PROG] (program) and a number blink
on the display panel.
3
Press
/
to allocate a number (1 to
20 for FM and 1 to 20 for MW) to the
radio station, and then press PROG to
confirm.
» The preset number and the frequency
of the preset station are displayed.
4
Repeat above steps to program more
stations.
Note
•
To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In tuner mode, press
/
to select a preset
number.
Page 12