4.
Remove the carbon deposits on the muffler screen and spark arrester
using a wire brush.
5.
Install the muffler screen.
6.
Install the cover
TROUBLESHOOTING
1)Engine won't start
1. Fuel systems
No fuel supplied to combustion chamber.
No fuel in tank....Supply fuel.
Clogged fuel line....Clean fuel line.
Clogged carburetor....Clean carburetor.
2.Engine oil
Oil level is low....Add engine oil.
3. Electrical system
Poor spark
Spark plug dirty with carbon or wet....Remove carbon or wipe spark plug dry.
Faulty ignition system....Consult dealer.
4. Compression insufficient
Worn out piston and cylinder....Consult dealer.
2)Generator won't produce power
Safety device (AC) to "OFF" ...Stop the engine, then restart.
Safety device (DC) to "OFF" ...Press to reset the DC protector
15