Replacing Razor Heads; Storage - Philips 7325XL Owner's Manual

ENGLISH
18
Close the Razor Head Assembly.
10
Once A Month: Razor Heads
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid (e.g.
rubbing alcohol) and lubricated with one drop of
mineral oil (in the center of the head). This helps
prevent wear of the shaving heads.
After Each Use: Trimmer
1 Turn razor OFF.
Push down spring-release trimmer switch.
2
C
3 Clean trimmer with the brush every time
you use it.
C
4 Lubricate the trimmer teeth with one
drop of mineral oil every 6 months.
Close trimmer by pressing trimmer down.
5
This razor has no other user-serviceable parts.
For assistance call 1-800-243-3050.
Replacing the Razor Heads
◗ Replace the razor heads once a year for
optimal shaving results.
◗ Replace damaged or worn razor heads with
model HQ8 Philips Norelco razor heads only.

Storage

◗ Be sure razor is turned off. Remove cord from
outlet and razor before storing in a safe, dry
location where it will not be crushed, banged,
or subject to damage.
◗ Do not wrap cord around razor when storing.
◗ Store cord in a safe location where it will not
be cut or damaged.
◗ Do not keep razor permanently plugged into
outlet.
◗ Do not place or store razor where it can fall
or be pulled into a tub or sink, water or other
liquid while plugged in.
C
◗ Put the Protective Razor Head Cap on razor
to protect heads.
ENGLISH
19