Ethernet Port Link Status Leds - F5 ARX-2000 Hardware Installation Manual

Ethernet Port Link Status LEDs

ARX-2000 Hardware Installation Guide
Table 4.3 describes the LED colors and patterns that occur during various
operational states, such as booting, diagnostics, and so on.
Table 4.3 Alarm and Status LED Patterns and Operational States
Alarm LED Status LED
Off Green
Red Green (blinking)
Off Amber
Red Amber
Off Off
The Ethernet ports are located and labeled on the lower right front panel.
The Ethernet port LED labels are pointed out in the following figure.
Figure 4.2 Ethernet Port LED Labels
See the following table for details and status on the Ethernet LEDs.
Table 4.4 Ethernet Port Link Status LEDs
LED
LED in upper left
connector corner
LED in upper right
connector corner
Module State
Online
In the process of booting.
Online Partial. At least one processor is online,
but at least one processor is not online yet.
If the offline processor does not come online in
5 minutes, this status changes to Failed Partial.
Failed Partial. At least one processor is online,
but at least one processor has failed.
No power.
Status
Link status:
• Steady amber indicates that the port is enabled
and a link established at 100mb.
• Steady green indicates that the port is enabled
and a link is established at 1000mb.
Activity status. Flashing green indicates packet
traffic.
LED Indicators
4 - 5