F5 ARX-2000 Hardware Installation Manual page 42

Chapter 3
Connecting the Switch to the Network
Accessing the Client/Server Network
3 - 14
Running Release
test2.rel : Version 6.02.000.14365 (May 2 2012 20:08:52) [nbuilds]
Armed Release
test2.rel : Version 6.02.000.14365 (May 2 2012 20:08:52) [nbuilds]
Backup Release
test1.rel : Version 6.02.000.14364 (May 2 2012 16:53:14) [bmccann]
System Configuration: Version 602000.33
prtlndA uptime is 2 weeks, 0 days, 2 hours, 25 minutes.
Slot Admin ModuleType ModuleState FW Upgrade
‐‐‐‐ ‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐
1 Enabled ACM Online Disabled
Resource State Forwarding
‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐
Switch Up Disabled
Check the version at the replacement ARX. In this example, the software
version (5.1.0) is outdated.
SWITCH> show version
Copyright (c) 2002‐2009 by F5 Networks, Inc. All rights reserved.
Running Release
test1.rel : Version 5.01.000.11927 (Nov 23 2009 21:57:26) [nbuilds]
Armed Release
test1.rel : Version 5.01.000.11927 (Nov 23 2009 21:57:26) [nbuilds]
Backup Release
test3.rel : Version 5.01.000.11927 (Nov 23 2009 21:57:26) [nbuilds]
System Configuration: Version 501000.36
SWITCH uptime is 0 weeks, 0 days, 0 hours, 8 minutes.
...
The replacement switch must be connected to a machine on the network
containing:
• a new software-release file and
• the running-config file from the failed ARX.
If the replacement switch is running a release earlier than 6.0.0, the
interview script connects the switch to your OOB management network
only. If you are running 6.0.0 or later or if your ARX release files and
running-config files are accessible through the OOB network, you can skip
this section. These steps are required for systems that need to access the
client/server network.