Distance Warning - Volvo XC 90 Owner's Manual

27
Buttons and symbols for functions .
To deactivate cruise control:
1. Press the steering wheel button
> Cruise control is set in standby mode.
2. Press the steering wheel button ◀ (1) or ▶
(3) to change to another function.
> The driver display's symbol for cruise con-
trol (4) is extinguished - which
deletes the set/stored speed.
3. Press the steering wheel button
again.
> Another function is activated.
27 NOTE: The illustration is schematic - details may vary depending on car model.
28 Distance Alert
NOTE: The illustration is schematic - details may vary depending on car model.
29
NOTE
In cars equipped with Adaptive Cruise Con-
trol*, it is possible to switch between cruise
control and Adaptive Cruise Control – see the
heading "Switch between CC and ACC".
Related information
•
Cruise control (p. 288)
•
Activating and starting the Cruise control
(p. 289)
•
Managing speed for the Cruise control
(p. 290)
•
Deactivating/reactivating the cruise control
(p. 291)
(2).
•
Change between Cruise control and adaptive
cruise control* (p. 309)
(2)
DRIVER SUPPORT

Distance Warning*

28
The Distance Warning function
driver if the time interval to the vehicle ahead
becomes too short.
Distance warning is active at speeds
above 30 km/h (20 mph) and only reacts to the
vehicle ahead travelling in the same direction. No
distance information is provided for oncoming,
slow or stationary vehicles.
Warning light for Distance Warning on the windscreen
A warning light is visible on the windscreen and
illuminates with a constant glow if the time inter-
val to the vehicle ahead is shorter than the preset
value.
warns the
29
.
}}
293
* Option/accessory.