Show Trip Data In The Driver Display - Volvo XC 90 Owner's Manual

INSTRUMENTS AND CONTROLS

Show trip data in the driver display

The trip computer's recorded and calculated val-
ues can be shown in the driver display.
The values are saved in a trip computer app. Via
the app menu, you can choose which information
is shown on the driver display.
Open and navigate in the app menu
hand steering wheel keypad.
App menu
Left/right
Up/down
Confirm
The appearance of the display may vary depending on instrument variant.
36
170
1. Open the app menu in the driver display by
pressing (1).
(It is not possible to open the app menu
while there is an unacknowledged message
in the driver display. The message must be
confirmed before the app menu can be
opened.)
2. Navigate to the trip computer app to left or
right with (2).
> The top four menu rows show measured
values for trip meter TM. The next four
menu rows show measured values for trip
meter TA. Scroll up or down in the list with
(3).
3. Scroll down to the option buttons to select
which information to show in the driver dis-
play:
•
Distance to empty tank
36
using the right-
•
Odometer
•
Mileage for trip meter TM, TA, or no dis-
play of mileage
•
Instantaneous fuel consumption, average
consumption for TM or TA, alternatively,
no display of fuel consumption
•
Tourist (alternative speedometer).
Select or deselect an option with the O but-
ton (4). The change is made immediately.
Resetting the trip meter
–
Reset all information in trip meter TM (i.e.
mileage, average consumption, average
speed and driving time) with a long press on
the RESET button on the left-hand stalk
switch.
A short press on the RESET button resets
only the mileage.
Trip meter TA only has automatic resetting. The
meter is reset if the car is not used for four hours
or more.
Change unit
Change the units for mileage, speed, etc. via the
centre display as follows:
1. Press Settings in the top view.