Chronometer Mode - Midland 445 BT Instruction Manual

flash on the LCD display.
2. Press the or buttons to change the hour.
3. Briefly press the button again. The minutes will begin to flash
on the LCD display.
4. Press the or buttons to change the minutes.
5. Briefly press the button again to confirm the time.
6. To exit the clock mode, briefly press the CLOCK button.
When this mode is active, 445 BT will inform you about a new
incoming call, but the display will continue showing the time.
You can also transmit normally using the CALL or PTT buttons.
When this happens, the LCD display will automatically switch to
its regular operating screen, returning to clock mode as soon as
transmission is terminated.
5.2 Chronometer/Stopwatch mode
445 BT is equipped with a built-in stopwatch.
To activate it:
1. Press the STW (Stop Watch) button (15): StopWatch and 00:
will appear on the display.
2. To activate the chronometer, press the button. At this point, you
can:
• View the elapsed time, by pressing the button. To exit the
elapsed time viewing, press the button again.
• Stop the chronometer by pressing the button. To reactivate
the chronometer from its stopping point, press the button
again. Or else press the
chronometer at 00: .
00:00
3. To exit the stopwatch function, press the STW button again.
When the stopwatch function is active, 445 BT is still able to receive
calls, but the display will continue showing the chronometer's
progress.
When the stopwatch function is active, if you press the CALL or
PTT buttons, the radio will show the main screen during the call
but will continue to clock the chronometer's progress, which will
appear on the display immediately afterwards.
00:00
button if you wish to restart the