Lagoon 421 Owner's Manual page 35

LAUNCHING
• AFTER MAST INSTALLATION
- Lubricate all the bottle screws (see recommendations in the RIG-
GING chapter)).
- Stretch tightly the rigging (refer to RIGGING chapter for settings).
- Reconnect the electrical cables in the junction box at the base of
the mast located in the forward cockpit locker after running the ca-
bles through the gooseneck located at the front of the mast (see
ELECTRICITY chapter).
- Carefully check the tightness of the turnbuckle cotter pins,and pro-
tect with adhesive tape.
- Put the boom back. Refit all ropes.
RECOMMENDATION
Adjust the mast after a few trips.
• UNSTEPPING THE MAST
Proceed by carrying out the operations recommended for stepping
the mast in reverse order,taking care to mark the line locations with
stickers.
RECOMMENDATION
Before all dismasting operation, remember to disconnect
the electric cables
Pull gently while guiding the cables.
LAGOON 421
3
LAUNCHING
33