Power Supply
The laser can be operated with Alkaline batteries or rechargeable Li-Ion
batteries.
1. Open the battery compartment by pressing on the clip saying „open"
on the bottom side of the laser. Open the lid.
2. Remove the discharged batteries insert the new ones. Pay attention
to the correct polarity.
3. Close the battery compartment (clip).
Alkaline batteries: use four C batteries and insert them in the battery
compartment. Pay attention to the battery symbols. Do not short-circuit
the batteries. Do not load non-rechargeable batteries. This can result in
fi re hazard.
Charger
plug
Charger