Advertisement
ASSEMBLY INSTRUCTIONS:
1. Find a clean, level place to begin the assembly of your Billiard Table. The table will be assembled upside down
and then turned over on its legs once the assembly is completed. This game table is heavy, and turning it over
will require at least four strong adults.
2. Remove all of the parts from the box and verify that you have all of the listed parts as shown on the parts list
page. Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your
work surface.
X 1
1
X 2
2
3
X 2
X 12
6
7
X 12
9
X 4
P1
X 4
X 4
P5
P6
X 12
P7
X 6
FIG.1
3. Attach the Right Legs (#3) and Left Legs (#2) to the Mainframe (#1) using three Bolts (#6) and three Washers
(#7) per Leg. See FIG. 1.
4. Screw the Leg Levelers (#9) into the bottom of each Leg. See FIG. 1A.
4
X 2
8
X 12
FIG.2
5. Attach the End Leg Panels (#4) to the Legs using six Screws (#8) per End Leg Panel. See FIG. 2.
(Continued on the next page.)
1538410
FIG. 1
3
P1
FIG. 2
P5
P6
2
8
4
9
FIG. 1A
2
P7
3
1
7
6
4
www.themdsports.com
Advertisement
