Table of Contents
Advertisement
3.
Select Other in the Your e-mail source list, then tap Next.
4.
Select Other (POP/IMAP) in the Your e-mail provider list, then tap
Next.
5.
Enter your e-mail address. To allow Auto configuration to download
e-mail server settings automatically (if possible), make sure the Try to
get e-mail server settings from the Internet check box is selected.
6.
Tap Next. Auto configuration then attempts to download necessary
e-mail server settings so that you do not need to enter them
manually.
7.
Once Auto configuration has finished, tap Next.
8.
If Auto configuration was successful, the User name field
automatically gets populated. Enter your display name (the name you
want displayed when you send e-mail) and password. Select Save
password so you do not need to enter it each time you connect to
your e-mail server.
If Auto configuration was not successful, contact your ISP or network
administrator for the settings and enter them manually.
9.
Tap Next
10.
Review your account information, make any necessary changes, then
tap Next.
11.
Review the server information (incoming mail server and outgoing
mail server names), and make changes if necessary.
Note
The domain name is not required for an account with an ISP but may be
required for a work account.
12.
Tap Options to select download options, set the e-mail format
as HTML or plain text, and more. For more information, see "To
customize download and format settings".
13.
Tap Finish.
14.
A message then appears, prompting whether or not you want to
download messages to your device. Tap Yes or No according to your
preference.
Exchanging Messages 109
Advertisement
Table of Contents
