1.4 Rear Panel Diagram
1
Rear Panel Elements
1.
Cooling Fan: Do not obstruct.
2.
Power Connector, Voltage Selector and On/Off Switch
3.
IEEE-1394 Firewire Ports 1 and 2*
4.
10/100 Ethernet Port*
5.
SCSI Ports 1 and 2
6.
Dip Switches*
7.
RS-232 Port
8.
Alarm Out Relay Connection*
1.5 Connections
NOTE:
* The Ethernet, Aux dip switch, Alarm output and IEEE-1394 Firewire ports are
reserved for future upgrade.
SCSI Ports 1 and 2
Connect to either SCSI port. Using
the dip switches on the rear of the
unit, set SCSI Termination and
SCSI Power to On.
The unit does not currently support multiple SCSI device connections.
RS-232 Port
The RS-232 port is used for flash
upgrading the DVAA operating
system software.
2
3
4
Connector: 50 pin, high density SCSI-2.
Gender (on unit): Female.
SCSI ID: 0.
Connector Type: DB-9.
Gender (on unit): Male.
Cable Required: Null Modem.
5
4
6
7
8