Connecting Hard Drives; Powering Hard Drives - Philips DVAA Series Installation Instructions Manual

3.5 Connecting Hard Drives

Use an IDE cable to connect drives as shown in the previous diagram. When
attaching the IDE connector, make sure the connectors are oriented properly.
Connecting To The Motherboard
The red stripe on the connection ribbon
should connect nearest the Pin 1 indicator
Pin 1
Indicator
on the motherboard.
Connecting To The Hard Drive
The red stripe on the connection ribbon
should connect near the jumpers on the hard
Pin 1 Near
Jumpers
drive.

3.6 Powering Hard Drives

Connect the hard
Mother Board
drives as shown in
the diagram.
Power Supply
10