Timer Recording - Philips DVP3345V/F7 User Manual

E8E21UD_EN1.qxd 09.1.23
7
Press K or L to select a recording tape speed. The arrow
will appear beside your choice. The selected speed will flash
beside REC SPEED. Details about tape speed are on page 57.
You must select the recording speed to complete the
timer programming.
ONE TIME PROGRAM
PROGRAM NUMBER
DATE
START TIME
END TIME
L1/L2
REC SPEED
B SP
8
Press CLEAR to remove the menu.
9
Press TIMER SET.
●
In some cases, the DVD/VCR will switch to DVD mode
instead.
You may use the DVD player during a Timer Recording.
●
If you want to use the VCR until time for the recording,
don't press TIMER SET until a few minutes before the
recording should start. Or, press TIMER SET only when you
know you won't be using the VCR anymore (until after the
recording).
●
When "
DVD/VCR in VCR mode by pressing VCR or SOURCE.
You must first press TIMER SET on the remote control or
STOP/EJECT C A on the front panel to cancel the Timer
Recording temporarily. Then, you can use the VCR features
again.
When a Timer Recording ends
The DVD/VCR will turn off and "
will flash indicating that the recording is complete, then goes into the
timer standby mode again. (It may switch to DVD mode
automatically.) At this point, you cannot use the VCR unless you
release the DVD/VCR from the timer standby mode.
To release the DVD/VCR from timer standby mode
●
If the DVD component is active and no more Timer Recordings are
on standby, you can cancel the timer standby mode by pressing
TIMER SET or VCR on the remote control or by pressing SOURCE
or STOP/EJECT C A on the front panel.
●
If the DVD component is not active, or the "
lit indicating there are more Timer Recordings on standby, you can
cancel the timer standby mode only by pressing TIMER SET on the
remote control or by pressing STOP/EJECT C A on the front panel.
●
After releasing the DVD/VCR from timer standby mode, you can use
it as usual.
Canceling a Timer Recording Before the Recording Starts
1
Press VCR, then press SETUP so MENU appears.
2
Press K or L to select TIMER PROGRAMMING,
then press B.
3
Press K or L to find the program you want to
cancel.
4
While the program number is flashing, press s to
clear all the information for that program.
5
Press CLEAR to remove the menu.
2:42 PM Page 25
1
0 8 / 2 9 WED
0 7 : 3 0 P M
0 8 : 3 0 P M
L2
S P
SLP
" is lit (not flashing), you cannot put the
" on the DVD/VCR's display panel
Timer Recording (cont'd) 25
" is not flashing but
• To stop a started Timer Recording,
• To change incorrect information,
• If there is no tape in the VCR
• If one or more Timer Recordings
OPEN/CLOSE
1 2 3
4 5 6
TRACKING
7 8 9
CLEAR TITLE
+10 0
VCR SETUP DVD
DISC
INPUT MENU
OK
REW PLAY FFW
STOP PAUSE BACK
DISPLAY SUBTITLE ZOOM AUDIO
ANGLE SEARCH REPEAT REPEAT
A-B
REC SPEED MODE TIMER SET
Helpful Hints
press STOP/EJECT C A on the
front of the DVD/VCR. (You cannot
stop a started Timer Recording with
STOP C on the remote.)
press or to choose the
s B
item you want to change. Press
K or L to adjust the information.
when you press TIMER SET,
" " will flash. Insert a tape.
are on standby when one Timer
Recording ends, the DVD/VCR
will turn off automatically and
" " will appear on the
DVD/VCR's display panel
indicating that it is now ready for
another Timer Recording.
8
7
9