Swap Channel - Sanyo LCD-15CA1Z Instruction Manual

CHANNEL ARRANGEMENT
-/- - -/- -
C.SYS
P
MENU
VIDEO S
VOLUME (+/-) button

Swap Channel

With this function, you can swap two channels
stored in two different positions.
eg. To swap the channels on Position 6 and
Position 12.
1
1
To select Position 6.
2
2
Press the DIGIT button.
3
3
Press the ALTERNATE button when "--" is
displayed on the screen.
CH SWAP
26
26
NUMERIC
button
P P
ALTERNATE
button
S.SYS
POSITION
UP/DOWN
button
AUDIO S
6
- -
3
3
To enter Position 12 by pressing the NUMERIC
buttons 0, 1 and 2 sequentially. (To enter a
single digit position, eg. Position 3 by pressing
the NUMERIC buttons 0, 0 and 3 sequentially.
To enter a hundred digit position by pressing
the NUMERIC buttons sequentially.)
CH SWAPPING
12
Now, the channel swapping is finished.
NOTE:
If the TUNING LOCK is set "ON" in SETTING
menu, or one of the above channels has been
set as a "private position", this CHANNEL
SWAPPING function can not be set.
CH SWAP
012
6
12