Table of Contents
Advertisement
DIGITAL Laser Printer LN15 User Manual
Message
COVER OPEN
FUSER FAILURE
INVALID SIMM
JOB TIMEOUT
LOAD MFF size
LOAD TRAY n size
MANUAL TIMEOUT
MEMORY OVER FLOW
MEMORY SHORTAGE
MFF NOT INSTALL
Causes and solutions
Cause: The following occurred:
• Incomplete closing of upper door
• Incomplete locking of paper guide
inside the rear stacker
• Incomplete closing of rear unit of the
optional duplex unit
Solution: Perform the following.
• Close the upper door.
• Lock the paper guide.
• Close the rear unit of the duplex unit.
Note: See caution following in this table.
Cause: Malfunction in the fuser unit
Solution: If the error recurs, consult
your dealer for service.
Cause: Incorrect SIMM card (optional
emulation or font) installed
Solution: Press the
CONT.
Cause: PS job timeout.
Solution: Press the
CONT.
Cause: Paper mismatch occurred.
Solution: Set the specified tray to the
correct paper size specified.
Cause: Paper was not inserted into the
manual feed slot in the prescribed time.
Solution: Press the
CONT.
Cause: Memory overflow error
Solution: Press the
CONT.
Cause: Insufficient memory
Solution: Add RAM board.
Cause: No MFF installed
Solution: Install the MFF.
button.
button.
button.
button.
5-14
Advertisement
Table of Contents
