Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kasda KA300
Summary of Contents for Kasda KA300
-
Page 1: Wireless Router
Wireless Router KA300 User Manual www.kasda.cc Kasda Digital Technology Co.,Ltd... - Page 2 KA300 Wireless Router User Manual NOTICE This document contains proprietary information protected by copyright, and this Manual and all the accompanying hardware, software, and documentation are copyrighted. All rights are reserved. No part of this document may be photocopied or reproduced by mechanical, electronic, or other means in any form.
-
Page 3: Table Of Contents
KA300 Wireless Router User Manual Content 1 INTRODUCTION ........................3 ......................3 1.1 M EATURES 1.1.1 Wireless ..........................3 1.1.2 Network Protocol and Features .................... 3 1.1.3 Firewall ..........................3 1.1.4 Management Support ......................4 1.1.5 Operating System Support ....................4 1.1.6 Environmental ........................ - Page 4 KA300 Wireless Router User Manual 7.2.6 WDS Setup ........................32 – Q 7.3 S ....................35 ERVICE ETUP 7.4 S ......................36 ECURITY ETUP 7.4.1 Firewall setup........................36 7.4.2 URL Setup ......................... 37 7.4.3 Remote Access Setup......................37 7.4.4 DoS ............................ 38...
-
Page 5: Introduction
KA300 Wireless Router User Manual 1 Introduction Thank you for choosing our product. The KA300 Wireless Router uses Broadcom’s CPE solution that fully complies with IEEE802.11b/g/n standards. It will provide your SOHO with convenient Internet. 1.1 Main Features 1.1.1 Wireless ... -
Page 6: Management Support
KA300 Wireless Router User Manual Stateful Packet Inspection (SPI) Denial of Service Prevention (DoS) DMZ 1.1.4 Management Support eb Based GUI Upgrade or update via FTP/HTTP Command Line Interface via Telnet Diagnostic Test ... -
Page 7: Factory Defaults
KA300 Wireless Router User Manual PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 TCP/IP protocol on each PC Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari Factory Defaults The device is configured with the following factory defaults: ... -
Page 8: Hardware Description
KA300 Wireless Router User Manual 2 Hardware Description Front Panel Color Function Off: Power Not Supplied Blue On: Power Supplied On: The WAN port has detected a link with an attached device Blinking: Data is being transmitted or received by the WAN port... - Page 9 KA300 Wireless Router User Manual Rear panel Port Function Connect the device to a cable or DSL modem Connect the device to your PC's Ethernet port, or to ETH1,2,3,4 the uplink port on your hub/switch, using a RJ-45 cable System reset or reset to factory defaults...
-
Page 10: Hardware Installation
KA300 Wireless Router User Manual 3 Hardware Installation This chapter shows you how to connect Router. Meanwhile, it introduces the appropriate environment for the Router and installation instructions. 1. Using an Ethernet Cable to connect the WAN port of the ROUTER to a cable or DSL modem. -
Page 11: Pc Configuration Guide
KA300 Wireless Router User Manual PC Configuration Guide 4.1 Local PC Configuration in Windows 95, 98, ME, XP,7 1. In the Windows task bar, click the “Start” button, point to “Settings”, and then click “Control Panel”. 2. Double-click the “Network” icon. -
Page 12: Quick Setup Of The Router
KA300 Wireless Router User Manual Quick Setup of the Router In order to use the web-based management software, it will be necessary to use a computer that occupies the same subnet as the Router. The simplest way to do this for many users will be to use DHCP server that is enabled by default on the Router.please... - Page 13 KA300 Wireless Router User Manual The WAN connection type will appear, the quick setup supports two popular mode PPPoE, DHCP(Dynamic IP) to connect to the internet,If the connection type is PPPoE , enter the username and password provided by your ISP. If the connection type is dynamic IP, the router will obtain an IP automatically from you ISP.
- Page 14 KA300 Wireless Router User Manual (4)The Internet Connection Setup Wizard is complete. Click the Apply button to save and apply your settings. After the configuration above， Now you can surf the Internet.
-
Page 15: Web-Based Basic Management Guide
6.1 home page basic setting 6.1.1 Network (WANSettings) KA300 supports three types WAN connection.they are DHCP,Static IP,PPPOE, Select any of Click the them you will be able to configure the corresponding connection of WAN. ， the wan setup page will appear， as shown，... -
Page 16: Dhcp Connection Type
KA300 Wireless Router User Manual DHCP connection type If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will automatically get IP parameters including IP address, Subnet Mask, Default Gateway, from your ISP. You can see the page as follows ., Click the Save Settings button to save your settings. -
Page 17: Lan Settings
KA300 Wireless Router User Manual IP Address: Enter the IP address in dotted-decimal notation provided by your ISP. Subnet Mask: Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0. Default Gateway:(Optional) Enter gateway ddress dotted-decimal notation provided by your ISP. - Page 18 KA300 Wireless Router User Manual Local IP Address:Enter the IP address of your Router or reset it in dotted-decimal notation (factory default: 192.168.1.1). DHCP Server:Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must configure the computer manually.
-
Page 19: Wireless Settings
KA300 Wireless Router User Manual 6.1.3 Wireless Settings Cliick icon,you can configure the basic settings for the wireless network of 2.4GHz on this page. Wireless enable :Enable or disable the Wirless function here. Network Name（SSID）: Also called the SSID. Enter a value of up to 32 characters. The same name must be assigned to all wireless devices in your network . -
Page 20: Administration
KA300 Wireless Router User Manual Set up allowed time limits in the [Time Settings] map. Drag and drop to desired day/time. 6.3 Administration 6.3.1 Time setting This page allows you to set the time manually or to configure automatic time synchronization. -
Page 21: Password
KA300 Wireless Router User Manual 6.3.2 Password: It is strongly recommended that you change the factory default user name and password of the Router. All users who try to access the Router's web-based utility will be prompted for the Router's user name and password. -
Page 22: Firmware Update
KA300 Wireless Router User Manual Click the Reset Defaults button to reset all configuration settings to their default values. The default User Name: admin The default Password: admin The default Subnet Mask: 255.255.255.0 Note: All changed settings will be lost when defaults are restored. -
Page 23: Web-Based Advance Management Guide
KA300 Wireless Router User Manual 7 Web-based Advance Management Guide This chapter will introduce how to configure your router advanced，behind the advanced menu,there are six options :status，setup，wireless，service，security， administration. The Status page displays the Router's current status and wan configuration. 7.1 Setup Click advanced menu，and then click setup，you can set up WAN, LAN, IPV6,... - Page 24 KA300 Wireless Router User Manual WAN Connection Type (1) Automatic Configuration – DHCP If you connect using a dynamic IP address or cable modem, keep the default: Automatic Configuration - DHCP. (2) Static IP . To use a fixed IP address to connect to the Internet, select Static IP.
- Page 25 KA300 Wireless Router User Manual Service Name (Optional) – Enter the Service Name, if required by your ISP. Connect on Demand: Max Idle Time – You can configure the router to disconnect your Internet connection after a specified period of inactivity (Max Idle Time).
-
Page 26: Lan Setup
KA300 Wireless Router User Manual To clone your network adapter's MAC address onto the router, select Enable and enter your adapter's MAC address in the Clone WAN MAC field or click Get My PC's MAC to fill in the MAC address of your PC you are using. Then save your changes by clicking on the Apply button. -
Page 27: Ipv6
KA300 Wireless Router User Manual 7.1.3 IPV6 WAN Set IPv6 WAN Network Prefix – Sets the IPv6 Network Prefix for WAN. LAN Set IPv6 LAN Network Prefix – Sets the IPv6 Network Prefix for LAN. IPv6 DNS Server – Sets the IP addresses of the DNS servers to use for resolving host names. -
Page 28: Advanced Routing Setup
KA300 Wireless Router User Manual 7.1.4 Advanced Routing Setup Static Routing A static route is a pre-determined pathway that network information must travel to reach a specific host or network. To set up a static route between the router and another network: 1.Select a number from the Static Routing drop-down list. -
Page 29: Wireless Setup
KA300 Wireless Router User Manual 7.2 Wireless Setup 7.2.1 Wireless Basic Settings • Network Mode – If you have Wireless-G and 802.11b devices in your network, then keep the default setting, Mixed. If you have only Wireless-G devices, select G-Only. If you would like to limit your network to only 802.11b devices, then select B-Only. -
Page 30: Guest Access
KA300 Wireless Router User Manual 7.2.2 Guest Access Use the Guest Access feature to provide guests visiting your home with Internet access only. The guest network is a wireless network separate from your local network. • Allow Guest Access – To allow Internet access through a guest network, select yes. -
Page 31: Security
KA300 Wireless Router User Manual 7.2.3 Security You can select one of the following security options: • Disabled – The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. It is recommended strongly that you choose one of following options to enable security. -
Page 32: Wps Setup
KA300 Wireless Router User Manual • RADIUS Server – Enter the IP address of the RADIUS server. • RADIUS Port – Enter the port number of the RADIUS server. The default is1812. • Shared Key – Enter the key shared between the Router and the server. -
Page 33: Wireless Access Setup
KA300 Wireless Router User Manual • Push Button – This button's function is same to the physical button on the router. • Client's PIN – If the client supports the connection way by entering its PIN.Enter the Client's PIN.Click Register button to connect the client. -
Page 34: Wds Setup
KA300 Wireless Router User Manual 7.2.6 WDS Setup WDS (Wireless Distribution System) is a Wireless Access Point mode that enables wireless bridging in which WDS APs communicate only with each other only (without allowing for wireless clients or stations to access them), and/or wireless repeating in which APs communicate both with each other and with wireless stations (at the expense of half the throughput). - Page 35 KA300 Wireless Router User Manual 1. Make these 2 routers same channel ( not Auto ) and security mode and passphrase in Wireless – Basic Settings & wireless security. 2. ROUTER1 can use default IP address 192.168.1.1, and ROUTER2 should change the IP address to other IP address but in same segment like 192.168.1.2.
- Page 36 KA300 Wireless Router User Manual 4. ROUTER 2 : Go to Setup=>WLAN=>WDS page, Select Wireless Bridge in Mode. Add ROUTER 1’s wireless interface MAC address (BSSID) to ROUTER 2’s AP MAC Address. And then Click save. If you can access the Internet from ROUTER 1, then you can set the PC which connect with ROUTER 2 as this: IP Address: 192.168.1.x...
-
Page 37: Service - Qos Setup
KA300 Wireless Router User Manual 7.3 Service – QoS Setup QoS (Quality of Service) QoS assigns different levels of priority to specific types of network traffic, so it helps to ensure optimal performance for demanding, real-time applications, such as online gaming, VoIP calls, and video streaming. -
Page 38: Security Setup
KA300 Wireless Router User Manual Upstream Bandwidth This option sets the maximum upstream bandwidth of your Internet connection. To allow the Router to detect the maximum, keep the default, Auto. To specify the maximum, select Manual. Then enter the appropriate bandwidth and select Kbps or Mbps. -
Page 39: Url Setup
KA300 Wireless Router User Manual • Filter Multicast – Prevents multicast packets from reaching the LAN. • Filter Internet NAT Redirection for IPv4 Internet Only – Prevents hosts on LAN from using WAN address of router to contact servers on the LAN (which have been configured using port redirection). -
Page 40: Dos
KA300 Wireless Router User Manual 7.4.4 DoS A "denial-of-service" (DoS) attack is characterized by an explicit attempt by hackers to prevent legitimate users of a service from using that service. • Enable DoS Prevention – Enable or disable DoS Prevention. And choose... -
Page 41: Appendix: Frequent Asked Questions
KA300 Wireless Router User Manual Appendix: Frequent Asked Questions Q: None of the LEDs are on when user power on the router? A: Please make sure what user use is the power adaptor attached with the router package， and check the connection between the AC power and router. - Page 42 KA300 Wireless Router User Manual Q: PC cannot browse Internet web page? A: Please make sure DNS server appointed to the PC is correct. User can use ping application program to test whether the PC can connect to the DNS server of the ADSL operator.