Use The Waterproof Housing - TE-Group GUARDO 360 CAM User Manual

USE THE WATERPROOF HOUSING

Place the camera in the waterproof housing:
Open waterproof case
IMPORTANT! USAGE FOR PREVENTING WATER LEAKAGE
1. BEFORE EVERY USE: check carefully that the waterproof housing is securely locked
onto the camera and that there are no ' o bjects' (such as sand or a lock of hair) in
between the rubber strap and the housing, as this could cause leaking.
2. The rubber strap is the most important part of the waterproof housing as it is the
element that keeps your camera waterproof. The rubber strap can be removed to clean
it in fresh water. Do not use a damp cloth to dry, but dry it by shaking it.
3. Whenever used in salty water, ALWAYS clean the plastic waterproof housing afterwards
in non-salt water and dry it. This is to avoid corrosion or to prevent dust/sand/...
building up in the rubber seal.
!ATTENTION!
If you do not consistently perform/execute the above mentioned tips, water damage may
occur and can result into the camera being damaged/destroyed. The warranty does NOT
cover water damage caused by improper use by the user!
Place camera Close backdoor
6
Grasp arm & Click
into place