Step 1: Basic Recorder Connections; Connecting The Antenna Cables - Philips DVDR3350H User Manual

Step 1: Basic Recorder Connections

~
MAINS
Connecting the antenna
cables
These connections enable you to watch
and record TV programs using this
recorder. If the antenna signal is
connected via a VCR, Cable Box or
Satellite Receiver, ensure that these
devices are turned on in order to watch
or record the cable programs.
If your TV is equipped with an
Antenna In (RF IN) jack only,
see page 19 for the complete connection
to your TV.
If you want to connect to a VCR
and/or Cable Box/Satellite Receiver,
see page 20~22 for the complete
connection to your TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
16
SATELLITE ANTENNA
CABLE
A
ANTENNA
TV
B
A
Connect the existing Antenna/Cable TV
signal (or from the Cable Box/Satellite
Receiver {RF OUT or TO TV}) to the
ANTENNA
B
Use the supplied RF coaxial cable to
connect the TV
to the antenna input jack on your TV
(VHF/UHF RF IN.)
Helpful Hint:
– Depending on how you have currently
connected your TV channel (directly from an
off-air antenna or Cable box or VCR), you
will have to disconnect some of the cables
before you make the above connection.
VIDEO
VIDEO
(CVBS)
(CVBS)
S-VIDEO
(Y/C)
L L P
AUDIO AUDIO
R R P
AUDIO
EXT 1
OUT 2 OUT 1
jack on the recorder.
jack on the recorder
Y
B
R
COAXIAL
DIGITAL AUDIO OUT
TV
S-V ID E O IN
AU D IO
O U T
V ID E O IN