Philips DVDR 615/17 User Manual page 85

To save energy, you can switch off the clock display on the DVD recorder. Programmed
(TIMER) recordings will still take place.
Moreover, you can present the most important features of the DVD Recorder in scrolling text
in the display (demo).
: If the DVD Recorder is switched off using STANDBY m , the clock display is not
visible.
: If the DVD Recorder is switched off using STANDBY m , the clock display is visible.
: If the DVD Recorder is switched off with the STANDBY m button, a list of the
most important features is shown in the display.
You can change the brightness of the display on the DVD recorder. This setting only affects the
DVD Recorder when it is switched on.
: The display appears with normal brightness.
: The display appears less bright.
: The display is switched off.
In this menu you can set the remote control type to which your DVD Recorder should respond:
: The DVD Recorder also responds to a DVD player remote control (remote
control code RC-6).
Choose this setting if your Philips TV remote supports DVD functions.
: The DVD Recorder only responds to the supplied remote control.
User preferences