Table of Contents
Advertisement
Available languages
Available languages
Using SELECT , select from the following options:
: Repeated daily recordings from Monday to Friday.
: Repeated weekly recordings (every week on the same day).
5
Confirm with OK .
a
b The channel number of the TV channel has not yet been assigned to
the PlusCode number. Using C , D or the number buttons 0..9 on
the remote control, select the corresponding channel number (name)
of the TV channel and confirm with OK .
a
b The entered PlusCode number is incorrect. Repeat your entry or
cancel using the SYSTEM-MENU button.
b Check the time/date (see 'Setting the time & date' in 'Installing your
DVD recorder').
a
b A daily recording was entered for the wrong day. Daily programming
can only be used for recordings to be made from Monday to Friday.
6
The decoded data appears after confirmation. You can go back
and change the data. Select the appropriate input field with C or
D . Change the information with CH+ A , CH- B or the
number buttons 0..9 .
Use the SELECT button to select '
'
' and '
'.
Select '
Using CH- B , select the recording mode '
'.
7
If all information is correct, press the
information is stored in a TIMER block.
' or '
' using C .
,
' in the input fields
,
,
,
,
',
OK button. The
Programming a recording (TIMER)
Advertisement
Table of Contents
