Table of Contents
Advertisement
Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.8, No. 18)
Serial ATA3 Connectors
(SATA_EXP0_1:
see p.8, No. 11)
(SATA3_4_5:
see p.8, No. 12)
(SATA3_A1_A2:
see p.8, No. 13)
(SATA3_A3_A4:
see p.8, No. 14)
Serial ATA Express
Connectors
(SATA_EXP0_1:
see p.8, No. 11)
Please connect the
SPEAKER
DUMMY
chassis power LED and
DUMMY
the chassis speaker to this
+5V
header.
1
PLED+
PLED+
PLED-
These ten SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* If M2_1 is occupied by
a SATA-type M.2 device,
SATA3_0 will be disabled.
* M2_2, SATA3_4 and
SATA3_5 share lanes. If
either one of them is in
use, the others will be
disabled.
* If M2_3 is occupied by
a SATA-type M.2 device,
SATA3_3 will be disabled.
* To minimize the boot
time, use Intel® Z270
SATA ports (SATA3_0)
for your bootable devices.
Please connect either
SATA or PCIe storage
devices to these
connectors.
Z270 SuperCarrier
25
Hide quick links:
Advertisement
Table of Contents
