Settings - Sitecom WMA-1000 Full Manual

7.2 Settings Page
The settings page allows you to configure the device, e.g. enable or disable stream-
services, change password, change device name....
Device name: this field allows you change the device-name of the device, by
changing the name you can customize how the device appaers on playback
devices.
Note: If you change the name, this will also become the URL to access the device e.g.
when you change the name too wma-livingroom then the url to access the device will
become: http://wma-livingroom
Language: allows you to change the language of the interface.
Enable Airplay Service: enable or disable Airplay support.
Enable DLNA Service: enable or disable DLNA support.
Password Protection: enable or disable password protection.
Note: disabling password protection, allows other users to easily modify settings on
the device through the interface.
Username: change the username to access the device's interface.
Password: change the password to access the device's interface.
Show password: allows you to view the password which is normally been hided.
Note : when you've forgotten the username or password, please reset the device by
pressing the WPS button for 15 seconds.