Power Supply; Powering Your Remote Control - Philips PET1002 User Manual

Power supply

Using the AC / DC adaptor
Connect the supplied adapter to the set
and the main power supply (as shown).
✔
TIP
To avoid damage to the player, switch off before plugging or unplugging the
AC adaptor.
Using the car adapter
Connect the supplied car adapter to the set and the car cigarette lighter outlet.
✔
TIP
• To avoid damage to the player, switch off before plugging or unplugging
the car adaptor.
• When connecting with car power (cigarette lighter) adaptor, be sure the
input voltage of the adaptor is identical with car voltage.

Powering your remote control

1 Open the battery compartment.
Remove the protective plastic tab
(first time users only).
2 Insert 1 x lithium 3V battery, type CR2025,
then close the compartment.
Batteries contain chemical substances, so they
should be disposed of properly.
Incorrect use of batteries can cause electrolyte leakage and will corrode the
compartment or cause the batteries to burst.
Remove the batteries if the set is not to be used for a long time.
PREPARATIONS