Power Supply; Powering Your Remote Control - Philips PET720/04 User Manual

Power supply

Using the AC / DC adaptor
Connect the supplied adapter to the set and
the main power supply (as shown).
✔
TIP
To avoid damage to the player, switch off before plugging or unplugging the AC
adaptor.
Using the car adapter
Connect the supplied car adapter to the set and the car cigarette lighter outlet.
✔
TIP
• To avoid damage to the player, switch off before plugging or unplugging the car
adaptor.
• When connecting with car power (cigarette lighter) adaptor, be sure the input
voltage of the adaptor is identical with car voltage.

Powering your remote control

1 Open the battery compartment.
Remove the protective plastic tab
(first time users only).
2 Insert 1 x lithium 3V battery, type CR2025, then
close the compartment.
CAUTION
-
Batteries contain chemical substances, so they should be disposed of
properly.
-
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type.
-
Incorrect use of batteries can cause electrolyte leakage
and will corrode the compartment or cause the batteries to burst.
-
Remove the batteries if the set is not to be used for a long time.
PREPARATIONS