easyteck T510 User Manual page 21

Powering On/Off the Mobile Phone
Hold the End key for a while to power on the mobile phone. A power-on animation appears
on the display screen.
Input the phone lock code and press the ok key if the mobile phone prompts you to input the
phone lock code. The original code is 0000.
Input the PIN and press the ok key if the mobile phone prompts you to input the PIN. The PIN
is provided by the network operator for new opening SIM card.
Enter the standby interface.
To power off the mobile phone, hold the End key for a while.
Linking to the Network
After the SIM card and the mobile phone are successfully unlocked, the mobile phone auto-
matically searches for an available network. After finding a network, the mobile phone enters
the standby state. When the mobile phone is registered in the network, the name of the
network operator is displayed on the screen. Then you can dial or receive a call.
Dialing Calls
In the standby interface, press number keys to input the area code and the telephone num-
21