easyteck T510 User Manual page 20

If the battery voltage is too low to enable the mobile phone to be powered on, charge the
battery for a longer time. In this case, the battery icon does not flicker until a long time after
the battery enters the charge status.
• During the charging, ensure the battery is placed in a room temperature environment or in
an environment close to room temperature.
• Immediately stop using the battery if the battery produces odor, overheats, cracks, distorts
or has other damage, or if the electrolyte leaks.
• The battery wears out with use. A longer charging time is required as the battery is put into
use for a long time. If the total conversation duration decreases but the charging time increa-
ses even though the battery is properly charged, purchase a standard battery from the OEM
or use a battery approved by our company. Using any poor-quality fittings will cause harm to
your mobile phone or even incur danger!
Note: To guarantee your personal safety and protect the environment, do not litter the bat-
tery! Return the old battery to the mobile phone manufacturer or place it in specified battery
reclamation areas. Do not litter any battery with other rubbish.
Warning: Short-circuits of the battery may cause explosion, fire, personal injury or other
severe consequences!
20