Step 3: Setting The Speakers; Test Tone - Turning On/Off; Adjusting The Delay Time; Adjusting The Speaker Output Levels - Philips MX2600 User Manual

Getting Started

Step 3: Setting the speakers

You can adjust the delay time (center and
rear speakers only) and volume level for
individual speakers. These adjustments
let you optimise the sound according to
your surroundings and setup.

Test Tone - Turning on/off

If you have turned on the test tone, the
test signal will be automatically generated
to help you judge the sound level of each
speaker.
1
In disc mode, press SYSTEM MENU.
➜ Use the 1 2 3 4 keys on the remote
to navigate in the menu.
2
icon and press 4.
Highlight
and press 2.
Move to
Move to {TEST TONE} and press 2.
NIGHT MODE
CNTR DELAY
REAR DELAY
TEST TONE
TEST TONE
3
Press 34 to select a setting.

Adjusting the delay time

4
Press 34 to highlight one of the options
below at a time, then press 2.
NIGHT MODE
CNTR DELAY
REAR DELAY
TEST TONE
CENTER DELAY SET TO 1 MS
To return to the previous menu, press 1.
TIPS:
To exit the
16
OFF
ON
menu, press SYSTEM MENU.
{CNTR DELAY} – Select this to set the
delay time in relation to the listening
position/distance from the center speaker
(5ms, 3ms, 2ms, 1ms or OFF).
{REAR DELAY} – Select this to set the
delay time in relation to the listening
position/distance from the rear speakers
(15ms, 12ms, 9ms, 6ms,
5
Press 1 2 to adjust the settings that
best suit your surround sound needs.
6
Press OK to confirm.
Helpful Hint:
– Use longer delay time settings when the
rear speakers are closer to the listener than
the front speakers.

Adjusting the speaker output levels

You can adjust the rear speakers, center
speaker and subwoofer output levels by
comparing the sound from the front
speakers.
●
Press the respective buttons on the
remote (REAR +-, CENTER +-
and SUBW +-) to adjust the output
level between -15dB ~ +10dB.
Helpful Hint:
– If you have selected Stereo mode,
adjusting the center and rear speakers'
volume level will have no effect.
3ms or OFF).