Basic Operation - cec TL2N Owner's Manual

CD TRANSPORT TL2N

Basic Operation

Normal playback
Press the POWER button to turn the CD transport on.
Open the CD door sliding backward by hand. When the door is open the display
indicates "OPEn".
Lift up the CD-Stabilizer, if it is on the
CD-Turntable, holding the edge of
upper layer part securely. Place a disc
on the CD-Turntable, and then the
CD-Stabilizer gently on top of the disc.
Important: Make sure that a disc
and the CD-Stabilizer have been set
correctly and laterally before closing
the CD door.
Inclined positioning of CD-Stabilizer
and/or improper connection of CD-
Stabilizer to a disc might cause an
unstable rotation resulting in the ability to read music signals correctly.
Slightly push the CD-Stabilizer center with your fi nger for correct location and better
mounting to disc.
and place the CD-Stabilizer on the disc before closing the CD door. The CD trans-
port is unable to read the disc unless you place the CD-Stabilizer correctly.
cause a malfunction.
Close the CD door completely sliding forward by hand. The CD transport should
automatically start spinning the disc to read its information, and the total number of
tracks and the total playing time should appear on the display.
Leaving it withtout pressing any button the display will change approx.10 seconds
later to show the 1st track playback ready.
Press the PLAY/PAUSE
track number should be shown on the display, followed by the elapsed time for the
track being played.
Skip Track
Press the Skip forward
track from the track being played (or displayed).
NOTE: Pressing the skip backward
18
Make sure you place the disc on the CD-Turntable with the label side facing up,
Only use the supplied CD-Stabilizer. Any other type of the CD-Stabilizer may
10 seconds later
/ button to start playback. The playback
or backward
the beginning of the track being played. Press the backward
repeatedly to jump to the previous track.
CD stabilizer
disc
button to jump to the next or previous
button during playback, playback will return to
fabric sheet side
down
indicator and
button twice