Ｆ】 Stop Rail Arm - Kawai ANYTIME X2 GP Service Manual

〔6〕 PARTS LIST & ASSEMBLING INSTRUCTIONS
【F】 Stop Rail Arm
【F-1】 Stop Rail Arm (1)L/R, (2)L/R, (3)
Assembling Instruction
1. Insert hexagon nut ⑦ into sensor screw ④ .
2. Insert sensor screw ⑥ into stop rail arm (1) (2) (3) ① until the point shown in the drawing below.
3. Tighten hexagon nuts ⑦ and fasten sensor screws ⑥ .
＊ Assemble a pair of stop rail arm (1) (2) L&R per unit. (See the drawing below for the configuration)
＊ Assemble two stop rail arm (3) per unit.
Stop rail arm (1) L/R
No.
1 Stop Rail Arm (1) L
2 Stop Rail Arm (1) R
3 Stop Rail Arm (2) L
4 Stop Rail Arm (2) R
5 Stop Rail Arm (3)
6 Sensor Screw
Stop rail arm (2) L/R
7 Nut
– 40 –
Description Description
Stop rail arm (1) L
Stop rail arm (1) R
Stop rail arm (2) L
Stop rail arm (2) R
Stop rail arm (3)
Sensor screw
Hexagon nut
Stop rail arm (3)
Remarks PN
915360
915386
915424
915459
915556
CN-14R 914762
M4 917222