ION Operator's Manual page 7

OPERATING
LOCK
LEVER
OPERATING
ION
FIGURE 3
Reverse Switch Operation
To use reverse operation function to flush hole of unwanted
debris do as follows: SEE FIGURE 4
1. To activate reverse function, depress the reverse switch
and then depress the operating lock and operating
trigger at the same time.
2. To stop auger release the operating trigger.
To Flush a hole, do as follows:
1. Place the auger half way down the hole with the auger
starting in the hole. The top of the auger flight must be
above the water and slush.
2. Activate reverse function and continue to lower the
auger into the hole. The lower ring of the auger must exit
the bottom of the hole.
3. After a few seconds of reverse operation, release the
operating trigger.
NOTE: KEEP POWERHEAD CLEAR OF WATER. Water will
come back up the hole and overflow.
4. Repeat the above steps three times to clear the hole.
REVERSE SWITCH
ION
FIGURE 4
Check for parts online at www.ioniceaugers.com or call 800-345-6007 M-F 8-5 CT
TRIGGER
ION X
REVERSE SWITCH
ION X
Battery Charging and Monitoring
OPERATING
1. Remove the battery retaining strap by pulling it towards
LOCK
LEVER
the motor. SEE FIGURE 5
2. Remove the battery by sliding it off of the powerhead.
3. Plug the charger into a 110/240AC outlet.
OPERATING
TRIGGER
4. Slide the battery into the charger.
5. The charge indicator light should blink green.
SEE FIGURE 6
6. When indicator light is lit solid green, the battery is fully
charged.
7. Once the battery has been fully charged, unplug the
charger from the wall.
8. Remove the battery from the charger.
NOTE: Recharging the battery after each use is best for
9. Place the battery back onto the powerhead when ready
to use.
NOTE: Battery should be off of the powerhead when not
10. Pull the battery retaining strap back over battery.
FIGURE 5
FIGURE 6
Charger Indicator Lights and Meaning
ACTION/COLOR
Flashing green
Solid green
Flashing red
Solid red
the life of the battery.
in use.
LITHIUM BATTERY
(STEP 1)
BATTERY
RETAINING
STRAP
(STEP 2)
ION
INDICATOR
LIGHT
MEANING
Battery charging
Battery fully-charged
Battery too hot
Battery too cold
Operator's Manual
ION® Electric Ice Augers
ION X
7